125mm Pro Crack chasing blade for repair of cracks in concrete

125 x 6mm Tuck Pointing Blade
This is a high quality Tuck Point Blade with undercutting protection for long blade life.

Diamond Concrete Grinding solution for high stock removal of all material from masonary surface without dust including Premium Diamond Cup Wheel

From 6-115mm Diamond Crown Bits For Marble,Granite,Vitrified Tiles,Porcelain

125mm High Performance Diamond Cup Wheel For High Stock Removal Of Concrete

180mm High Performance Spiral Diamond Cup Wheel
For High Stock Removal of Concrete

Motor manufacturer Honda
Max output (As rated by the engine manufacturer) 6 kW / 8 hp 3,5 kW / 4,8 hp
Cutting equipment
Diamond blade, max 350 mm
Max cutting depth 120 mm
Adjustable right rear wheel for increased stability.
Husqvarna’s floor saws are robust, well designed and easy to use thanks to features as protective cage, lift bail and cutting depth indicator.
Patent-pending raise/lower assist system, using gas spring.
Honda 4.8 hp (FS 305) or 8 hp (FS 309) engine.
Only 54 kg with retractable handle (FS 305).
Patent-pending single tube raise / lower system.
Controlled water supplied for longer use with one tank.
17 l water tank.
Adjustable right rear wheel for increased stability.
Cutting on left-hand side
SYDNEY METRO DELIVERY ONLY

When it comes to handheld petrol-driven cutters for demanding jobs, with blades up to 400 mm and cutting depths up to 145 mm, our largest model, the Husqvarna K 1250, is in a class of its own. Despite a large and powerful engine, this brawny, full-size machine is surprisingly easy to operate. The Husqvarna K 1250, with an impressive 5.8 kW output, is the market’s most powerful cutter, and can easily drive 400 mm blades.
Engine
Engine Air-cooled 2 stroke engine
Power output 5,8 kW
Cylinder displacement 119 cm³
Cutting equipment
Blade diameter 350/400 mm
Max cutting depth 125/145 mm

Active Air Filtration™
The Active Air Filtration™ has been upgraded with a redesigned paper filter, for even better dust control.

SmartCarb™
Built-in automatic filter compensation, maintains high power and lowers fuel consumption.

EasyStart
Ensures 50% easier starting by reducing the compression in the cylinder during starting.


Wet cutting kit
Active Air Filtration™
The Active Air Filtration™ has been upgraded with a redesigned paper filter, for even better dust control.


SmartCarb™
Built-in automatic filter compensation, maintains high power and lowers fuel consumption.



EasyStart
Ensures 50% easier starting by reducing the compression in the cylinder during starting.


Wet cutting kit
All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

Including 400mm HS Diamond Blade

A floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on medium-sized concrete areas. The grinding and suction is efficient thanks to the high rpm levels, the wide range of grinding discs and the design of the dust guard and vacuumport. PG 280 SF is easy and convenient to use, with ergonomically designed handlebar and low noise levels. Two engine options: 2.2 kW 1-phase. 240v Motor
Redi-lock
Husqvarna’s Redi Lock™ is an instant and hassle-free system for changing diamond tooling. Robust construction ensures maximum protection and life of your diamond tools

Blade shaft wrench and angle cut guide supplied as standard.
Removable water tank makes cleaning and refilling easier.
Quality continuous rim diamond blade supplied with the machines.
All spindle diameter 25.4 mm and 230 mm blade size for all machines.
Impressive cutting length of 730 mm.
Oscillating head for plunge cutting.
Large removable table for easy cleaning.
Supplied with high quality 230 mm GS 2 continuous rim blade, angle cutting guide, side extension for cutting larger tiles, blade shaft wrench, and new self-cleaning electric submerged water pump

Rubber shield helps keep debris away from operator and from entering the motor
Removable base for a closer edge-to-edge cut
Guide wheels on the tool guard ensure smooth tool travel over surface material
Tool body position can be adjusted (0 - 80 degrees) for operator comfort; operates independently of cutting depth for convenience and efficiency
Rubberized wrap around handle for increased control and comfort with reduced operator fatigue
Lock-on button for continuous operation
Ball bearing construction for longer tool life
Externally accessible brushes for greater serviceability

125mm Angle Grinder
Unique Super Joint System
1,400W motor
Patented Zig Zag varnish to protect critical parts plus labyrinth construction
Long life auto cut out carbon brushes
Electronic speed controller keeps grinder disc rotating at a constant speed even under heavy loads
Soft start function
Dial up variable speed control
Continuous Rating Input 1,400W
Max Capacity - Depressed center wheel 125mm
Max Capacity - Wire cup brush 90mm
Max Capacity - Abrasive disc 125mm
Max Capacity - Diamond wheel 125mm
No load speed 2,800-11,000rpm
Overall length 299mm
Spindle thread DIN M14x2
Net weight 1.8kg
Power supply cord 2m

AVT vibration absorbing handle
Change lever positioned on the top of the machine for reduced possibility of breakage
3 mode - Rotary Drilling/Chiselling/Drilling
Torque limiter
One-touch sliding chuck forr east bit changes
24 Bit angle settings
Electronic with: - Variable speed control
Max. capacity - Concrete32mmJoules6.4jOverall length398mmNet weight4.9kgImpacts Per Minute1,650-3,300ipmDrive ShankSDS PlusNo load speed315-630rpmMax. capacity - Steel13mmMax. capacity - Wood32mmContinuous rating input850WCapacity - Concrete (Diamond Core Bit)90mm

Ideal for smoothing finishes on concrete as well as leveling concrete seams
Powerful motor for the most demanding jobs
Electronic Speed Control engineered to maintain constant speed under load
Electronic Current Limiter helps protect the motor from overloading

INCLUDES:
Loop Handle
5" Offset Diamond Wheel
Metal Carrying Case
Lock Nut Wrenc
Hex Wrench
Dust Bag Assembly
Dust Shroud Brush Set

Blade diameter 125mm
Max. cutting capacity - Depth 0-30mm
Max. cutting capacity - Width 6-30mm
Continuous rating input 1,400W
No load speed 9,000rpm
Overall length 346mm
Net weight 4.1kg
INCLUDES 2 x PREMIUM DIAMOND BLADES

Power input 2800 W
No-load speed 1st / 2nd gear450/900rpm
Coring capacity 1st gear 152 - 254 mm
Coring capacity 2nd gear 51 - 152 mm
Arbor reception 1 1/4"x7 UNC
Weight 9,0 kg

Powerful 1500-watt motor

WCE 30 wall chaser is ideal for the installation of conduit for electrical cables.

The cutting width (26 mm max.) between the two parallel diamond cutting discs can easily be set with the new design stepless adjustment

High Performance electronics with overload protection.

Spindle lock

In line dust extraction connection.



SPECIFICATIONS


Power input 1500 W

Disc diameter 125 mm

Cutting width 15 - 26 mm

Cutting depth 8 - 30 mm

No-load speed 9500 rpm

Weight 4.3 kg

WCE 65 wall chaser is ideal for plumbers and builders for installing waste pipes.

Powerful 2300-watt motor

Cutting width (60 mm max.) between the two parallel diamond cutting discs can easily be set with the new stepless adjustment

Dust extraction connection

Axial rotation of drive unit for optimum cutting into corners

Parallel guide as standard equipment

Spindle lock

High Performance electronics with overload protection.



SPECIFICATIONS


Power input 2.300 W

Disc diameter 230 mm

Disc diameter (concrete) 200 mm

Cutting width 17 - 56 mm

Cutting depth *(with 200 mm disc) 10 - 65 (0 - 50)* mm

No-load speed 1st / 2nd gear 6600 rpm

Weight 8.7 kg

Sturdy 1900-watt motor with large power reserves

The cutting width (45 mm max.) between the two parallel diamond cutting discs can easily be set with the new design stepless adjustement

Dust extraction connection

Ergonomic Softgrip for comfortable use

Spindle lock

Unique Swing-Grip adjustable handle for optimum user comfort whatever the cutting application

Four roller

delivered with two 150 mm diamond discs



SPECIFICATIONS


Power input 1.900 W

Disc diameter 150 mm

Cutting width 6 - 45 mm

Cutting depth 0 - 45 mm

No-load speed 5.800 rpm

Weight 6,6 kg

Voltage 220 - 240 V AC

Important characteristics:
Diamond grinder operates at the perfect speed for diamond tools
1,600 W motor for rapid material removal and working progress
Folding segment allows you to work directly on walls
Integral wall stop for safe, rapid working on walls
Efficient dust extraction and automatic seal with guard
Perfect handling and balance on floors, walls and ceilings
Manually adjustable VIBRASTOP auxiliary handle

Accessories included:

Basic machine
Diamond disc DIA ABRASIV-RGP 130
Flange set
Face pin wrench
Technical data
Rated input 1600 W
No-load speed 3000-7700 min[-1]
Tool grind/cut diameter 130 mm
Tool reception D25/M14
Connection Ø d/e 36 mm
Weight 3,8 kg

Important characteristics:
3 counter-rotating grinding discs - effortless control of the machine, perfect grinding results
Detachable guard allows for working right into corners or onto edges
Easy tool replacement, made simple with the integral spindle lock
Good visibility and clean air due to dust extraction attachment
Perfect handling due to "Vibrastop" auxiliary handle with polyurethane sleeve
Easy operation for use in hard-to-get-to places (over head, in the corners, angles, edges) due to compact construction and easy operation system

Accessories included:

Grinding discs SET Diamond Abrasiv (1x Ø 35 mm, 2x Ø 44 mm)
Dust-extraction attachment
Auxiliary handle
Systainer

Stonger, Lighter, More Compact. Easily the lowest vibration machine in its class with a staggering 40% reduction in vibration.

Technical Data
Model TS 420
Cutting Depth (mm) 125mm
Displacement (cm 3) 66.7
Power (kW) 3.2
Standard Cutting Wheel (mm) 350
Weight (kg) 9.6

Includes Diamond Wheel 350mm