Includes
Phillips Bits: 1" - (1) P1, (7) P2, (2) P3; 2" Power - (2) P2, (1) P3
Square Bits: 1" - (1) SQ1, (4) SQ2, (1) SQ3; 2" Power - (2) SQ2
Torx® Bits: 1" - (1) T15, (1) T20, (1) T25; 2" Power - (1) T25
Magnetic Nut Drivers: (1) 1/4" Red, (1) 5/16" Amber, (1) 3/8" Blue
(1) Magnetic Bit Holder
(1) Case with Bulk Storage Container

NEW MODEL-NEW MODEL-NEW MODEL
NEW HEAVY DUTY MOTOR OVER 40% MORE POWER THAN THE AS160.
DUST SEALED MOTOR,IMPROVED CUTTING SPEED.
Details.
120mm Depth Of Cut
1250watt Motor
Auto Cut Off Brushes
4.3kg
5100rpm
240volt

• Measures angles in ° or inclines in %
• Acoustic signal at 0° or 90°
• Direction arrows display the deviation to the horizontals or verticals
Length: 600 mm
Measurement range: 360° (4 × 90°)
Electronics measuring accuracy 0°/90°: ± 0.05°
Electronics measuring accuracy at 1°-89°: ± 0.2°
Measurement accuracy, bubble levels: 0.057° = 1 mm / m
Power supply: 9 V 6LR61 (Block)
Operating duration approx.: 200 H
Automatic deactivation facility, approx.: 5 min
Weight approx.: 0,7 kg
Width: 25 mm
Height: 60 mm

Features:
- Measures angles in ° or inclines in %
- Acoustic signal at 0° and 90°
- Direction arrows display the deviation to the horizontals and verticals
- Automatic rotation of the measured values when working overhead
- Hold function to hold measuring results at the push of a button
- Slanted, easy-to-read display
- Sturdy and handy
- 2 vials enable use as a spirit level
Measuring range: 360° (4 x 90°)
Measurement accuracy, Electronic 0°/90°: ± 0.05°
Measurement accuracy, Electronic at 1° - 89°: ± 0.2°
Measurement accuracy, bubble levels: 0.057° = 1 mm / m
Power supply: 9 V 6LR61 (Block)
Operating duration approx.: 200 H
Automatic deactivation facility, approx.: 5 min.
Weight approx.: 1,3 kg
Width: 25 mm
Height: 60 mm

Extremely accurate angle calculation
• Faster, more precise and more efficient calculation of angles
• Precise transfer of the angles onto workpieces
• The greatest accuracy over the long term due to the integrated, wear-free and temperature-independent Bosch Precision Angle Sensor
Measurement range: 0 – 220°
Measurement accuracy: ± 0.1°
Measurement accuracy, bubble levels: 0.057° = 1 mm / m
Power supply: 4x 1.5 V LR6 (AA)
Automatic deactivation facility, approx.: 5 min
Staple length: 40 cm
Length: 400 mm
Weight, approx.: 1,0 kg
Width: 33 mm
Height: 60 mm

• The DD500X shop model is designed for durability and has the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits-including split points and masonry bits.
• Increase capacity with 3/4" chuck accessory.
• New "Push to Stop" design on the drill point splitting port will not allow you to over split the bit point.
• User replaceable sharpening wheel design for simple replacement.
• One piece alignment system improves precision, and adjustability.
• Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits.
• For the serious drill bit user, DIY, hobbyist, and professional
• Sharpens 3/32" - "1/2" drill bits
• Sharpens High-speed Steel, Carbide, Cobalt, TiN-coated and Masonry bits
• Can sharpen 3/32" - "1/2" reverse-twist (left-hand) drill bits with optional accessory
• Includes professional hard-shell carrying case

• The DD750X shop model is designed for durability and has the flexibility required to sharpen the largest range of dull or broken bits-including split points and masonry bits.
• The DD750X also adds increased capacity, sharpening "1/2" to "3/4" bits.
• One chuck sharpens all sizes 3/32"-3/4"
• Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits.
• New "Push to Stop" design on the drill point splitting port will not allow you to over split the bit point.
• Adjustable material take-off allows user to change the amount of bit material that can be removed to further extend the life of your bits.
• User replaceable sharpening wheel design for simple replacement.
• Cast aluminum point angle shuttle for added durability.
• New permanent magnet motor produces consistent power, regardless of speed or load.
• Sharpens High-speed Steel, Carbide, Cobalt, TiN-coated and Masonry bits
• Can sharpen 3/32" - "1/2" reverse-twist (left-hand) drill bits with optional accessory
• Includes professional hard-shell carrying case

The all-round carefree package with which all applications can be carried out professionally in interior fittings, renovation and hobbies
1 FEIN MULTIMASTER FMM 250 Q quick action system in a sturdy plastic case
1 x BONUS NEW SANDING PAD

Power consumption 350-1200 W
Airflow max. 3900 l/min
Max. vacuum 24000 Pa
Filter surface area 3060 cm²
Rubber-insulated mains cable 7,5 m
Container/Filter bag capacity 36/34 l
Dimension (L x W x H) 630 x 365 x 596 mm
Maximum wattage of connected tool 2400 W
Weight 13,5 kg
• suction hose Ø 27 mm x 3.5 m long, anti-static

• hose garage

• Cable holder

Gyprock & Timber Floor Sander

PLANEX + CT26 + 25-180grit Discs
The new PLANEX really gets stuck in, removing up to 30 kg of material per hour. That's why we recommend that it's only used with the new PLANEX special extractor CT26LLF. Designed specifically for extracting fine dust, this manoeuvrable extractor follows your every move, providing maximum efficiency and constant suction power. It delivers excellent results, a clean building site and most importantly, a healthy working environment.
We recommend that you always use a class M extractor when working with the PLANEX long-reach sander LHS 225

One machine adjustable to three different lengths due to the quick-release attachment system (1.1m, 1.6m and 2.1m)
Massive material removal capacity due to perfectly meshed together robust steel gears
Outstanding results with minimum effort due to suction power
Convenient transportation and tidy storage due to the Maxi Systainer
Twice as efficient compared with an equivalent drywall sander (up to 30kg dust per hour)

90mm Gear-driven eccentric sander
Strengths and benefits:
Four tools in one: for coarse sanding, fine sanding, Delta sanding and polishing. Resulting in low investment costs and savings on working time
High material removal rate thanks to ROTEX cam track
First-class surface results through eccentric motion
FastFix sanding pad system, tool-less
Effortless work thanks to a weight <1.5 kg
Numerous gripping positions thanks to slim, ergonomic shape

Power consumption 1010 W
Idle engine speed 250-600 min-1
Connecting thread M14
Weight 4,2 kg
Power supply 240 V
Mains frequency 50 Hz

10 pce Mega Kit

4 x Battery 18 volt 3.0Ah Li-ion
Standard Accessories
Charger and 2 heavy duty on site carry bags
Charger_ChargingTime 45 mins


DV18DL: Cordless Hammer Driver Drill
WH18DL: Cordless Impact Driver
C18DL: Cordless Circular Saw
CR18DL: Cordless Reciprocating Saw
G18DL: Cordless Grinder
DH18DL: Cordless Rotary hammer
CJ18DL: Cordless Jig saw
RB18DL: Cordless Blower
UB18DL: Lantern
UB18D: Torch

H65SB2
Demolition Non-Rotary Hammer
Description:
Strongest demolition power and durability in this class
Low noise and vibration level
Triple dust sealed, double insulated design
Comfortable shock absorbing handles
Robust construction for longer life
High impact energy: 42 joules
Strong alloy motor housing
Specification:

Chuck 30mm Hex
Length 726mm
Weight 16.5kg
Impact Rate 1400bpm
Brush 999086
Power Input 1400 watts
Standard Accessories Bull Point, hexagon bar wrench, carry case, chisel

Chuck 28mm Hex
Length 880mm
Weight 32kg
Impact Rate 850bpm
Brush 999074
Power Input 1650 watts
Standard Accessories 3 spanners
Designed for heavy demolition work: concrete, road base, masonry and stone material
Ideal substitute for air operated, compressor equipment where access is difficult
Comfortable shock absorbing handles
More impact energy: 55 joules
Hexagon Drive

Maximum output 5000W/240 Volt AC. Rated output 4500W
Delivers greater fuel efficiency via the built-in Eco-Throttle
“I-Monitor” self-diagnosis function protects your investment
Environmentally friendly with low exhaust and noise emissions
Starts first time, every time with convenient electric start and recoil start back-up

Maximum output 6500W/240 Volt AC. Rated output 5500W
Delivers greater fuel efficiency via the built-in Eco-Throttle
Quiet operation at 69dB (A)
“I-Monitor” self-diagnosis function protects your investment
Starts first time, every time with convenient electric start and recoil start back-up
The EM65is is the largest capacity inverter generator in its class and builds on advanced technology used in Honda’s extremely popular EU Series generators.

Equipped with Honda’s revolutionary ECO-Throttle system the EM65is automatically adjusts the engine’s rpm to generate only as much power as required by the appliance, thus reducing fuel consumption by approximately 10% compared to conventional generators.

An innovation on this EM inverter generator is a new ‘i-Monitor’ LCD which gives the operator fingertip access to information about the generators’ performance. The ‘i-Monitor’ feature acts as an hour meter displaying hours of operation, generator output, engine speed and the battery voltage. It also boasts an overload warning light which flashes if the generator is overloaded or if its temperature rises abnormally. In this unlikely event, the generator will automatically switch off. An engine oil level warning is also provided by the ‘i-Monitor’ and the engine will shut down when the level is low.

The EM65is features an electric start with recoil back-up and is equipped with wheels and a fold-up handle for easy transportation.

It is the perfect generator for powering larger appliances and will run anything from a circular saw to the most sophisticated computer equipment.
SYDNEY METRO DELIVERY ONLY

The EU30is features a microcomputer-controlled sinewave inverter that guarantees commercial-quality electricity – making it ideal for use with frequency sensitive electrical equipment such as computers.

It also uses a high-speed multi-point alternator that is integrated into the engine itself. This Honda developed technology reduces the overall weight and size by 25% to 50% compared to similarly classed conventional models, making it very portable.

The EU30is also features an Eco-throttle which adjusts the engine speed to meet the load demand. This increases fuel economy whilst also reducing noise as the engine is not required to run at full capacity unnecessarily.

The generator is Parallel Connection capable. This feature allows two EU30i’s to be quickly and easily linked using a special parallel connection cable to double your output to 6Kva. With electric-starting and enough power to be used in a wide range of home, recreational and professional uses, the EU30is incorporates all of Honda’s portable power technology.
12 Amp/12 Volt DC, maximum 3000W/240 Volt AC
Delivers greater fuel efficiency via the built-in Eco-Throttle
New high-speed multi-point alternator is integrated into the engine to reduce size and weight
Delivers better than commercial quality electricity
Starts first time, every time with convenient electric start and recoil start back-up
SYDNEY METRO DELIVERY ONLY
INCLUDES PRE DELIVERY

The EU30iu has a light,Compact bodyfor handy carrying plus low noise for convenience as well as an increased ease of use.
Built in wheels & trolley handle kit
Maximum 3000watt usable power
Quiet 57db noise level
Low oil alert protects engine
only 35kg

6 Amp/12 Volt DC, maximum 700W/240 Volt AC
High-quality electricity is generated via the built-in cyclo-converter
Whisper-quiet 56dB (A)
Lightweight 12kg
Up to 4.5 hours of continuous operation on a full fuel tank
Portable electric power continues to grow in popularity as more and more electronic devices and appliances become an important part of our lives both at work and home.

For over 35 years, Honda generators have set the industry standard for portable generators with the most extensive model selection for a variety of commercial and consumer applications.

The EX7 uses the same high-speed multi-point alternator as the EU10i. This Honda developed technology reduces overall weight and size by 25% to 50% compared to similarly classed conventional models, making lifting and transporting even easier.

The EX7 uses Cyclo-converter technology which ensures “clean” electricity with minimal Sine wave distortion, even under conditions of frequent load This generator's portability and quality power makes it ideal for a wide range of uses

Features
8 Amp/12 Volt DC, maximum 1000W/240 Volt AC
Delivers greater fuel efficiency via the built-in Eco-Throttle
Lightweight 13kg
Whisper-quiet operation from 52dB (A)
Up to 8 hours of continuous operation on a full fuel tank

2000watts / 240 Volt AC
8amp/12 dc Charger
Delivers greater fuel efficiency via the built-in Eco-Throttle
Up to 15 hours of continuous operation on a full fuel tank
Lightweight 21kg
Whisper-quiet operation from 53dB (A)
BONUS GENUINE HONDA COVER VALUE $ 66.00

Now powered by Honda’s Generation II mini 4-stroke engine
Economical 1” volume pump
Big 35m head
Delivers 110L/min capacity

Transport handle.
The steering mechanism is adjusted by turning the handle.
The vibration axle is mounted on double bearings.
Equipment and components are treated against corrosion.
4-stroke motor.
The handle can be clipped onto the beam for easy transport.
Supplied with mounting wrench and transport handle

NEW NEW NEW NEW NEW NEW NEW
Engine
Power output 4.8 kW / 6.44 hp
Cylinder displacement 94 cm³ / 5.74 cu.inch

DEX, the new Dust Extinguisher System that gives cleaner cutting with less water usage and slurry.
Easy to start thanks to Air Purge and decompression valve.
The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life.
Efficient vibration dampening reduces vibrations to less than 5 m /s², for more convenient operation.
DEX – water-saving wet cutting kit for efficient dust management.
Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages.

A floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on medium-sized concrete areas. The grinding and suction is efficient thanks to the high rpm levels, the wide range of grinding discs and the design of the dust guard and vacuumport. PG 280 SF is easy and convenient to use, with ergonomically designed handlebar and low noise levels. Two engine options: 2.2 kW 1-phase. 240v Motor
Redi-lock
Husqvarna’s Redi Lock™ is an instant and hassle-free system for changing diamond tooling. Robust construction ensures maximum protection and life of your diamond tools

Blade shaft wrench and angle cut guide supplied as standard.
Removable water tank makes cleaning and refilling easier.
Quality continuous rim diamond blade supplied with the machines.
All spindle diameter 25.4 mm and 230 mm blade size for all machines.
Impressive cutting length of 730 mm.
Oscillating head for plunge cutting.
Large removable table for easy cleaning.
Supplied with high quality 230 mm GS 2 continuous rim blade, angle cutting guide, side extension for cutting larger tiles, blade shaft wrench, and new self-cleaning electric submerged water pump

From USA Jacksonville, AR – The new AGATEC 110 rotating laser is ideal for installing drop ceilings and drywall and interior layout and renovations. It can also be used for outdoor layout applications such as aligning and squaring tilt-up walls, decks, and foundations.
The AGATEC 110 self-levels electronically in both horizontal and vertical modes, and can be used for leveling, vertical alignment, plumb, and squaring.
The laser package includes a wall mount which can remain attached to the laser when stored in the carrying case, speeding daily set-up. The wall mount’s unique design places the laser at the proper height, so that the beam hits the center of the magnetic target when the target is at the correct installation height for the grid.
Accuracy is ± 1/8” at 100 ft. (± 3 mm at 30 m); working range is 650 ft. (200 m) diameter.
Other features include:
-- Three operating modes: rotating, dot, and scanning (variable scan angle from 2° to 36°)
-- Choice of 150 or 600 rpm
-- Split beam for 90° angles and plumb
-- Split beam (square shot) is left/right adjustable
-- Slope match: up to ± 10% in X axis (use manual mode to override self-leveling)
-- Long battery life: 160 hrs. with 2 D alkaline batteries
-- H.I. (height of instrument) warning to prevent errors
-- Electronic field calibration
Interior package: wall mount, remote control, magnetic target, laser-enhancing glasses
GC (outdoor) package: wall mount and combination detector/remote control with rod clamp

NEW: The Leica Lino L2P5 combines all the advantages of the Lino dot and line lasers. It has four points and two lines which are exactly at right angles to one another. With the Leica Lino L2P5 you are well equipped for any alignment or levelling task!

Range up to 15 m depending on lighting conditions
Range with detector > 30 m
Levelling accuracy @ 5 m ± 1.5 mm
Self-levelling range 4° ± 0.5°
Accuracy o plumb point @ 5 m ± 1.5 mm
Accuracy of horizontal line @ 5 m ± 1.5 mm
Vertical accuracy @ 3 m line length ± 0.75 mm
Number of laser points 4
Number of laser lines 2
Beam direction vertical, horizontal, up, down, right, left
Laser type 635 nm, laser class II
Batteries type AA 4 × 1.5 V
Protection class splash water/ dust proof IP54
Operating temperature -10 °C to 40 °C
Storage temperature -25 °C to 70 °C
Dimensions (H × D × W) 117.8 × 130.7 × 75.4 mm
Weight without batteries 370 g
Tripod thread ¼”

NEW: The Leica Lino P5 projects five laser beams, which are exactly at right angles to one another. This greatly simplifies setting out tasks and makes your interior fitting-out more precise and efficient

Simple, one-button operation, fully automatic, general construction laser
with tripod & staff

The Leica Rugby 55 provides the today's contractor with the tools needed for virtually any leveling or alignment job. The Leica Rugby 55 features an easy to use keypad, a watertight seal, variable head speeds, selectable scanning modes, a bright red beam,Alkaline Batt Pack

Quick and easy gravity auto levelling for horizontal and vertical.
Comes with a receiver / remote control and staff bracket.
100 m radius with receiver.
Wall bracket available for inside use.
The laser for almost all levelling jobs!

Product Information
Handy type line laser Ez-liner
Simple, but multiple works ! Compact & Rugged body with rubber cover. EZ-Liner are Simple, but they have multi-functions and you will find their high performances on your job sites !
Compact & Rugged body with rubber cover
Easy Mode Selection
Wide range of laser line
Tilt mode available on each mode
Available to use Detector
Cross line on ceiling by 2 vertical lines
Safety Lock for Pendulum

"""NEW-NEW-NEW-NEW"""
Leica DISTO D2, the small partner for indoor applications.
Measuring distances and calculating results with the smallest laser distance meter of the world. The compact and handy base model was specifically designed for indoor applications. Shortcut keys for addition, subtraction, area and volume calculation make measuring fast and very reliable. The last 10 measurements are also stored. As with all Leica laser distance meters, the laser dot is clearly visible. You can always see your targeting point, even if the target object is in a hard to access area. Leica DISTO D2 you will never use a measuring tape again!

Measuring range: 0.05 m up to 60 m;
Typ. accuracy: ± 1.5 mm, Precise, fast and reliable indoor measurements
Shortcut keys: Easy-to-use and rapid access to frequently used functions
Illuminated 3-line display: Measured values can be read even in the dark
Flip-out end-piece: Measure from edges or corners
Stake out function: Stake-out equal distances
Time delay release: Measure without shake
Simple Pythagorean functions: Indirect height and width measurements for inaccessible positions
IP 54: Splash and dust proof

Features Your advantages
Measuring range of 0.05 up to 200 m
(0.16 ft up toﾠ650 ft)
typ. accuracy ﾱ 1.0 mmﾠ(ﾱ 0.04 in)* Precise, quick and reliable measurements
Digital Pointfinder with 4x zoom and high resolution color display Convenient measuring to distant objects, even in strong sunlight
Power Range Technology" Measure long distances, up to 100 m without and 200 m with a target plate
Tilt sensor Measure vertical angles up to ﾱ 45ﾰ at the touch of a button
Horizontal distance measurement using the tilt sensor It's no problem to determine distances despite obstructions
Trapezium function Simple and quick measurement of roof slopes and facade areas
Pythagorean functions Indirect height and width measurements at inaccessible positions
Detailed display Additional measurement information available at a touch of a button, e.g. angle information

Features Your advantages
Measuring range of 0.05 m / 0.16 ft up to 200 m / 650 ft; typ. accuracy ﾱ 1.0 mm / ﾱ 0.04 in Precise, quick and reliablemeasurements
BLUETOOTHﾮ Error-free and quick data transfer to Pocket PC or PC
Leica DISTOTM Transfer software is included Easy transfer for further processing in Excel, Word, AutoCADﾠor other Windows-based programs
AutoCAD plug-In Convenient drawing using your AutoCAD software
360 tilt sensor Measure any slope, even overhead
Digital Pointfinder with 4x zoom and high resolution colour display Convenient measurement of distant objects, even in bright sunlight
Indirect measurement functions with tilt sensor Determine distances to objects that cannot be measured directly because they lack reflective points
Height profile measurements Determine spot heights and ground profiles

New: Now the Leica DISTO™ D3a is also available with BLUETOOTH®. Due to this technology, measurement results can be wirelessly and accurately transferred to Pocket PCs and PCs. Furthermore, the Leica DISTO™ D3a BT is equipped with “Smart Horizontal Mode™, tilt sensor, calculation possibilities for rectangular and triangular areas, volumes, room dimensions and various types of Pythagoras functions.
Other Specs As Per D3a

New: With a measuring accuracy of ± 1.0 mm, the Leica DISTO™ D3a offers high precision at the touch of a button. The large, illuminated display shows the measurement results and supplementary information clearly and legibly.

Smart Horizontal Mode™
Thanks to the combination of distance and tilt measurements you can determine the horizontal distance precisely and simply. If you take a measurement at an inclination of ± 45°, the Leica DISTO™ D3a always calculates the shortest distance. So you can measure quickly and easily, even over the top of objects and people.

Multiple functions
The Leica DISTO™ D3a can calculate rectangular and triangular areas, volumes, room dimensions and various types of Pythagoras functions. A time delay release and enough memory for up to 20 measurements round off the instrument's wide range of functions – a concept designed to make your work life easier.

Multifunctional endpiece
Aim the instrument straight at the target point, whether measuring out of corners, slots or from edges: with this endpiece you are prepared for all measuring situations. The instrument detects the endpiece automatically, which helps you avoid expensive measuring errors.

Power Range Technology™
The integrated Power Range Technology™ makes measuring long distances very easy. You can measure up to 80 m without a target plate and even up 100 m with a target plate, without having to take single step.

Brilliant and clearly arranged display
The results are displayed on the large (2”), clearly arranged and high contrast display. At the touch of a button, the display makes supplementary information available about the measurements, e.g. indirect height, room dimensions, angle information or room angles.

+ Makita 18V Mobile Hammer Driver Drill #BHP454Z
+ Makita 18v Cordless Mobile Circular Saw #BSS610Z
+ Makita 18v Cordless Mobile Recipro Saw #BJR181Z
+ Makita 18V Flash Light. #BML185
• 18V Mobile Impact Driver (Tool Only) #BTD140Z
• 18V 115mm Mobile Angle Grinder (Tool Only) #BGA452Z
• 18V Mobile Rotary Hammer (Tool Only) #BHR202Z
• 18V Mobile Blower (Tool Only) #BUB182Z
• Jobsite Radio #BMR100
• 18V Mobile Jigsaw (Tool Only) #BJV180Z
• LXT Bag #
• 4 x Li-Ion 3.0Ah Batteries #BL1830
+ Makita LXT Lithium-lon Battery Charger. #DC18RA

Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
Hammer case cover protects work piece from scratches, increasing manoeuverability
Built-in L.E.D light for more illuminated accurate work
Compact design - 146mm long and weighs only 1.4kg
2 x Batt,Charger,Carry Case
Rubberised soft grip
BONUS 3RD BATT AT NO CHARGE

NEW MODEL - NEW MODEL
Makita's New and improved Power Cutter
More power, Lighter , Easier To Start
Five-stage, foam-paper-nylon system with Advanced Directional
Air Flow provides very clean air for better saw performance
Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
Improved ignition system with larger flywheel and rare earth magnets for more power
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground
On-Off-Choke operating switch on a single lever for operator convenience
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
Microchip controlled ignition system designed to compensate engine timing according to work load
Aluminum guard and wheel pressure plates to reduce weight
2-mass dampening system provides reduced vibration to operator

LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5x more cycles
than ni-cad tools.
1 x Hammer Drill Driver
1 x Recipro Saw
1 x Circular Saw
1 x Torch
1 x 115mm Grinder
1 x Impact Driver
2 x 3.0Ah Batt
1 x Charger

Blade diameter 110mm
Max. cutting capacity - at 90 degrees 24mm
Max. cutting capacity - at 45 degrees 21mm
Continuous rating input 860W
No load speed 12,000rpm
Overall length 236mm
Net weight 2.9kg
Power supply cord 5m

Blade diameter 180mm
Max. cutting capacity - at 90 degrees 60mm
Continuous rating input 1,400W
No load speed 5,000rpm
Overall length 270mm
Net weight 6.9kg
Power supply cord 5m

Rubber shield helps keep debris away from operator and from entering the motor
Removable base for a closer edge-to-edge cut
Guide wheels on the tool guard ensure smooth tool travel over surface material
Tool body position can be adjusted (0 - 80 degrees) for operator comfort; operates independently of cutting depth for convenience and efficiency
Rubberized wrap around handle for increased control and comfort with reduced operator fatigue
Lock-on button for continuous operation
Ball bearing construction for longer tool life
Externally accessible brushes for greater serviceability

LXT423 18V 3.0Ah Mobile 4 Piece Combo Kit
BTD140Z 18V Mobile Impact Driver (Tool Only)
BJV180Z 18V Mobile Jigsaw (Tool Only)
BMR100 Jobsite Radio
BL1830 2 x Li-Ion 3.0Ah Batteries

125mm Angle Grinder
Unique Super Joint System
1,400W motor
Patented Zig Zag varnish to protect critical parts plus labyrinth construction
Long life auto cut out carbon brushes
Electronic speed controller keeps grinder disc rotating at a constant speed even under heavy loads
Soft start function
Dial up variable speed control
Continuous Rating Input 1,400W
Max Capacity - Depressed center wheel 125mm
Max Capacity - Wire cup brush 90mm
Max Capacity - Abrasive disc 125mm
Max Capacity - Diamond wheel 125mm
No load speed 2,800-11,000rpm
Overall length 299mm
Spindle thread DIN M14x2
Net weight 1.8kg
Power supply cord 2m

Easy to grip housing - ensures easier handling with a smaller circumference and features soft grip for enhanced hand comfort
Slide-type on/off switch
Uses standard 115mm discs
Replaceable brushes
Warning lamp
Electronic current limiter for overload protection
Battery replacement reminder
Anti-start function for safety

Extremely compact and lightweight, with ample power for most fixing tasks
All metal gears and gear change mechanism for maximum gearbox durability
Mechanical 2-speed gearing
Compact and lightweight 4-pole motor for higher operation efficiency in heavy duty applications
Single sleeve keyless chuck allows for easy bit installation/removal
Single LED job light with afterglow function
Belt clip and bit holder convenient for both right and left handed users
Anti-slip rubberised grip
PRODUCT SPECIFICATIONSPRODUCT SPECIFICATIONSNo Load Speed - 2nd0-1,500rpmNo Load Speed - 1st0-400rpmImpact Rate - 2nd0-22,500ipmImpact Rate - 1st0-6,000ipmSpecifications - Capacity - Masonry13mmSpecifications - Capacity - Wood38mmSpecifications - Capacity - Steel13mmSpecifications - Capacity - Max Output300WSpecifications - Capacity - Chuck Capacity1.5-13mmOverall Length215mmNet Weight1.6kgCharge Time30minsVoltage18VMax Fastening Torque - Hard50NmMax Fastening Torque - Soft32Nm

230mm Angle Grinder
Heavy duty motor with 2,400W continuous rating input
Outstanding durability.Super anti-dust structure.Machined bevel gear. Increased heat resistance
Low vibration rear handle with soft grip for more comfort and control
Rotatable rear handle can be positioned to suit most cutting and grinding operations
Large rubber tool rest protects work piece from scratches
Gear housing can be positioned at every 90°
Soft start
Torque limiter
Continuous Rating Input 2,400W
Max Capacity - Depressed center wheel 230mm
Hole dia. 22,23mm
No load speed 6,600rpm
Dimension (LxWxH) 511x249x140mm
Net weight 5.5kg
Power supply cord 2.5m

Lightweight design, only 4.5kg
Lock on button
Rubberised soft grip
Aluminium housing
Easy servicing
Auto cut-out brushes
Powerful and compact body
Tool-less system for changing bits

Max. bit dia18mmContinuous rating input1,100WDrive ShankSDS MAX TypeImpacts Per Minute1,100 - 2,650Power supply cord5.0mNet weight5.6kgOverall length466mmJoules11.6

Powerful 1,500W motor; efficient 1,450bpm providing world class performance
Accepts 30mm hexagonal bits
Rugged side handle swivels 360° and can be locked into position for added control when using a chisel or clay spade
Convenient lock-on button for continuous operation
Enlarged rubberised grip is ergonomically designed to provide comfort
Damaging masonry dust is kept out of the cylinderntrol, and reduce operator fatigue
Secure locking bit system
Internal O ring fits around the end of the bit to ensure
SYDNEY METRO DELIVERY ONLY
LIMITED STOCK AT THIS PRICE

Lowest vibration in its class
AVT counter weight mechanism helps to reduce vibration
Auto cut-off brushes
Warning light indicates trouble with cord
28.6mm Hex shank

Dual mode operation - hammer with rotation or rotation only
SDS-plus chuck
Torque limiter protects tool and operator if the bit should jam
Idle stop function stops internal wear until the bit is in contact with material
Rotating brush holder system ensures optimum power in both forward and reverse, and offers longer brush and switch life
Lock-on switch button
Rubberised and dimpled non-slip soft grip for comfort and control

Max in Steel: 13mm
Max in Wood: 32mm
Max in Concrete: TCT 28mm / Core 80mm
Joules: 2.9Js
Blows per minute: 0-4500bpm
No Load Speed: 0-1100rpm
Net Weight: 3.3Kgs

AVT vibration absorbing handle
Change lever positioned on the top of the machine for reduced possibility of breakage
3 mode - Rotary Drilling/Chiselling/Drilling
Torque limiter
One-touch sliding chuck forr east bit changes
24 Bit angle settings
Electronic with: - Variable speed control
Max. capacity - Concrete32mmJoules6.4jOverall length398mmNet weight4.9kgImpacts Per Minute1,650-3,300ipmDrive ShankSDS PlusNo load speed315-630rpmMax. capacity - Steel13mmMax. capacity - Wood32mmContinuous rating input850WCapacity - Concrete (Diamond Core Bit)90mm

Most powerful and efficient in the class super comfort low vibration model
Recommendable for managing exposure of vibration to the body
9.5 joules of impact power
Low vibration level of 4m/s2
AVT (Anti Vibration Technology) built in

18v 4pce Cordless Combo Kit
2sp Hammer Drill,Recipro Saw,Circular Saw,Torch,2x3.0AhBatt,1xCharger,1xCarry Bag

Ideal for smoothing finishes on concrete as well as leveling concrete seams
Powerful motor for the most demanding jobs
Electronic Speed Control engineered to maintain constant speed under load
Electronic Current Limiter helps protect the motor from overloading

INCLUDES:
Loop Handle
5" Offset Diamond Wheel
Metal Carrying Case
Lock Nut Wrenc
Hex Wrench
Dust Bag Assembly
Dust Shroud Brush Set

Blade diameter 125mm
Max. cutting capacity - Depth 0-30mm
Max. cutting capacity - Width 6-30mm
Continuous rating input 1,400W
No load speed 9,000rpm
Overall length 346mm
Net weight 4.1kg
INCLUDES 2 x PREMIUM DIAMOND BLADES

Drill diameter in:
- Concrete: 20 mm
- Steel: 16 mm/8 mm
- Softwood: 40 mm/25 mm
No-load speed: 0 - 900 / 0 - 2.600 /min

Grinding wheel Ø: 125 mm
Rated input power: 1.100 W
No-load speed: 10.000 /min
Metabo S-automatic torque limiting clutch
Metabo "Quick" tool quick change
Quick halting of the grinding disc within 3 seconds after shutdown

Grinding wheel Ø: 125 mm
Rated input power: 1.100 W
No-load speed: 10.000 /min
Protect Safety Switch: Safe to operate due to an ergonomically integrated large paddle switch
Dead-man function: Immediate shutdown of the machine when the switch is released
Metabo S-automatic torque limiting clutch
Metabo "Quick" tool quick change

Grinding wheel Ø: 125 mm
Rated input power: 1.400 W
No-load speed: 7.000 - 10.500 /min
Electronic soft start
Thumbwheel for preselection of speed
Vario Tacho Constamatic (VTC) full-wave electronics
Metabo "Quick" tool quick change

Grinding wheel Ø: 230 mm
Torque: 17 Nm
No-load speed: 6.600 /min
Starting current limitation
Metabo "Quick": tool quick change

Base plate, dimensions from corner to corner: 93 mm
Orbital frequency at no load: 14.000 - 22.000 /min
Oscillating circuit: 1,8 mm

Variospeed (V) electronics
Oscillating circuit 2,8/6,2 mm
Diameter of backing pad: 150 mm
No-load speed: 13100 /min
Oscillating circuit: 2,8/6,2 mm

Drill diameter in:
- Concrete: 12 mm
- Steel: 10 mm
- Softwood: 20 mm
No-load speed: 0 - 2.800 /min

Drill diameter in:
- Concrete: 20 mm
- Steel: 13 mm/8 mm
- Softwood: 40 mm/25 mm
No-load speed: 0 - 1.000 / 0 - 3.000 /min

Grinding wheel Ø: 100 mm
Rated input power: 800 W
No-load speed: 10.000 /min

Drill diameter in:
- Concrete: 20 mm
- Steel: 13 mm/8 mm
- Softwood: 40 mm/25 mm
No-load speed: 0 - 1.000 / 0 - 3.000 /min

Drill diameter in:
- Concrete with hammer bits: 28 mm
Rated input power: 1.010 W
Max. single impact energy: 3 J
Diverse range of uses: for hammer drilling, chiselling, drilling without impact and screw-driving
Suitable for bits and accessories with SDS-plus shank end or cylindrical shank end (without impact)
Hammer stop
Rotation stop
Metabo "Quick" chuck change
Clockwise and anticlockwise rotation
Speed at rated load 950/2.600 /min
Max. impact rate 4.400 /min
Max. single impact energy 3 J

C12 D – Compact Screwdriver
C12 IC – Digital Inspection Camera
Batteries 2 x C12 B 1.5 Ah Li-Ion
Charger C 12 C 30 min

FEATURES
Advanced technology tuner for high reception accuracy and signal clarity
Weather proof MP3 player compartment
Powers from either M12 battery or 230v mains supply
8 hour run time on standard M12 battery
Weather proof aluminium speakers for rich, full sound
Digital display tuner for accurate signal selection

SPECIFICATIONS
Mute button for instant volume kill
Weight 1.6 kg
Speaker Power 10 Watt
Equaliser
Digital Tuner
MP3 Player compatibility - 1.5mm headphone jack socket
Model: C12 JSR-0

VARIABLE SPEED - Drilling speed increases or decreases with amount of pressure used - Precise drilling start and perfect adjustment to the application

QUIK-LOK - Detachable power cable - Fast & easy changing of damaged cables. Various tools can be used with only one cable

LOCK-ON FUNCTION - Tool can run without the speed switch being continuously pressed - Less tiring use in continuous applications

SAFETY-CLUTCH - Automatically stops or reduces motor power - Protects user and tool in case of jammed drill bit

REVERSE FUNCTION - Changes drilling direction - For screwdriving applications or getting out jammed drill bits

HAMMER-STOP FUNCTION - Turns off the hammering action - For screwdriving applications or drilling without percussion in wood/metal

SERVICE HATCH - Access hatch for servicing (e.g. worn-out carbon brushes) - Few screws for quick & easy serviceability

DEPTH-GAUGE KNOB - Single knob for releasing depth-gauge - Quick scrolling

SOFTGRIP - Rubber-padded rear handle - Comfortable handling & good grip

Milwaukees Legendary Quality Continues in This Heavy Duty Tradesmans Combo Kit. 5 Year Warranty on all Tools 2 Year warranty on Batteries.

Kit Includes:

1 x Hammer Drill Driver
1 x 1/4" Hex Impact Driver
1 x Reciprocating Saw
1 x 6 1/2" Circular Saw
1 x Jig Saw
1 x 4 1/2" Angle Grinder
1 x Torch
2 x Batteries 3.0Ah Li-Ion
1 x Charger
1 x Contractor Bag

"PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

Tough 125 mm angle grinder with powerful 1200-watt motor

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Patented quick release guard for easy adjustment

Patented Fixtec nut for fast and easy disc change



SPECIFICATIONS


Power input 1.200 W

Disc diameter 125 mm

No-load speed 11.000 rpm

Spindle diameter and thread M 14

Max. cutting depth 33 mm

Weight 2,4 kg

PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

The ultimate in mid-size grinding

Patented snap-lock guard

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Patented Fixtec nut for fast and easy disc change

Automatic cut-off carbon brushes

Spindle lock



SPECIFICATIONS


Power input 1250 W

Disc diameter 125 mm

No-load speed 11.000 rpm

Spindle diameter and thread M 14

Max. cutting depth 33 mm

Weight 2.5 kg

Power output 750 W

Efficiency 60 %

Voltage 220 - 240 V V AC

"PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

Tough 125 mm angle grinder with powerful 1500-watt motor

Electronic pack that offers constant speed power, soft-start, motor overload protection and under voltage relay safety

Patented quick release guard for easy adjustment

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Patented Fixtec nut for fast and easy disc change



SPECIFICATIONS


Power input 1.500 W

Disc diameter 125 mm

No-load speed 11.000 rpm

Spindle diameter and thread M 14

Max. cutting depth 33 mm

Weight 2,4 kg

"PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

Powerful 1.520 W motor

The ultimate in mid-size grinding

New digital electronic pack offers constant speed, soft start, motor overload protection and no-load speed limitation

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Patented snap-lock guard

Patented Fixtec nut for fast and easy disc change

Spindle lock

Automatic cut-off carbon brushes



SPECIFICATIONS


Power input 1.520 W

Disc diameter 125 mm

No-load speed 11.000 rpm

Spindle diameter and thread M 14

Max. cutting depth 33 mm

Weight 2.5 kg

Power output 910 W

Voltage 220 - 240 V V AC

Power input 1.520 W
Disc diameter 180 mm
No-load speed 7.600 rpm
Spindle diameter and thread M 14
Max. cutting depth 58 mm
Autobalancer system
Weight 2.9 kg
Power output 910 W
Voltage 220 - 240 V V AC

"PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

Light weight, slim and compact: a versatile all-purpose angle grinder

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Die-cast magnesium alloy gear casing for low-vibration running and a long working life

Dust-protected bearings and switch

Patented quick release guard for easy adjustment

Spindle lock save valuable time when changing grinding discs, with only one key



SPECIFICATIONS


Power input 750 W

Disc diameter 100 mm

No-load speed 10.000 rpm

Spindle diameter and thread M 14

Weight 1,8 kg

Cutting depth 28,4 mm

Power input 2800 W
No-load speed 1st / 2nd gear450/900rpm
Coring capacity 1st gear 152 - 254 mm
Coring capacity 2nd gear 51 - 152 mm
Arbor reception 1 1/4"x7 UNC
Weight 9,0 kg

SPECIFICATIONS
2 x Battery pack voltage / capacity 18 / 3.0 V/Ah
No-load speed 1st / 2nd gear 0-450 / 0-1800 rpm
Keyless chuck 1.5-13 mm
Max. drilling capacity in steel/wood/stone 13/55/16 mm
Percussion rate 28,000 bpm
Max. torque 73 Nm
Weight with battery pack 2.4 kg
5 year Warranty

FEATURES
HD18 PD - Percussion drill
C18 ID – Impact Driver
Batteries 2 x C18 B 3.0 Ah Li-Ion

FEATURES
HD18 PD - Percussion drill
HD18 SX – Reciprocating SAWZALL®
Circular saw
C18 WL – Work Light
Batteries 2 x C18 B 3.0 Ah Li-Ion
Charger C 18 C 60 min
Soft bag

FEATURES
HD18 PD - Percussion drill
C18 ID – Impact Driver
HD18 SX – Reciprocating SAWZALL®
C18 WL – Work Light
Batteries 2 x C18 B 3.0 Ah Li-Ion
Charger C 18 C 60 min
Soft bag

Features
Exclusive AM/FM Tuner with Digital Processor - Delivers Highest reception accuracy and signal clarity
Premium Speakers and 40 Watt Amplifier - Up to 6X more power than competitive radios
Weather Sealed Auxiliary Compartment - Protects MP3 players and other audio devices
Shock Absorbing ABS Polymer and Steel Construction - Protection against weather and abusive job site conditions
Customizable Equalizer and 10-Station Preset - Personalized sound and enhanced musical and vocal quality
AC/DC Versatility - Powered by Milwaukee M12™, M18™, V18™, V28® , NiCd 12V to 28V, and AC outlet
Built-In Bottle Opener - Convenience on and off the job site
12V DC Output - Provides power to charge most small electronic devices
Durable Cord Wrap - Easily store the 6-foot AC cord

KANGO HEX - 21mm tool reception - Superior service life & user-friendliness

IN-LINE DESIGN - Motor built in-level with the gear - Long tool enables upright, ergonomic working position

ANTI-VIBRATION SYSTEM - Significantly reduces vibration - Less strain on joints, more comfortable handling

DIGITRONIC FULL-WAVE ELECTRONICS - Use of complete alternating voltage - Well suited to working with generators

ELECTRONIC SOFTSTART - Short delay of full speed - Precise drilling/chiselling start

NO-LOAD SPEED LIMITATION - In a no-load situation, speed doesn't run at maximum - Protects motor, reduces wear

VARIABLE SPEED - Drilling/chiselling speed increases or decreases with amount of pressure used - Precise drilling/chiselling start and perfect adjustment to the application

SPEED PRESELECTION - Pre-adjustable maximum speed - Perfect speed setting to the application

SERVICE DISPLAY - Control light displays soon before carbon brushes wear out - In-time warning of service need

HEAVY-DUTY METAL GEARCASE - All-metal gearcase - Optimum seating of the gears for enhanced service life

ADDITIONAL SPADE HANDLE - Can be turned and adjusted to various angles up to 360° - Effective, ergonomic handling

ADDITIONAL STRAIGHT HANDLE - Can be mounted in 3 different positions - Effective, ergonomic handling

LOCK-ON FUNCTION - Tool can run without the speed switch being continuously pressed - Less tiring use in continuous applications

SAFETY-CLUTCH - Automatically stops or reduces motor power - Protects user and tool in case of jammed drill bit

ROTO-STOP FUNCTION - Turns off the rotation action - For chiselling applications

SERVICE HATCH - Access hatch for servicing (e.g. worn-out carbon brushes) - Few screws for quick & easy serviceability

SOFTGRIP - Rubber-padded rear handle - Comfortable handling & good grip

SOFTGRIP ADDITIONAL HANDLE - Rubber-padded additional handle - Comfortable handling & good grip



SPECIFICATIONS


Power input 1.700 W

Single blow energy 7 - 27 J

Hammer rate under load 975 - 1.950 bpm

Drilling speed (full-load) 125 - 250 rpm

Drill dia. in concrete / stone 28 - 50 mm

Drilling diameter with core cutter 45 - 150 mm

Drilling diameter with tunnel bit 50 - 80 mm

Weight 11.8 kg

Tool reception K-Hex

ANTI-VIBRATION SYSTEM - Significantly reduces vibration - Less strain on joints, more comfortable handling

SOFT-HAMMER FUNCTION - Reduces blow energy - Drilling/chiselling in sensitive materials

DIGITRONIC FULL-WAVE ELECTRONICS - Use of complete alternating voltage - Well suited to working with generators

ELECTRONIC SOFTSTART - Short delay of full speed - Precise drilling/chiselling start

NO-LOAD SPEED LIMITATION - In a no-load situation, speed doesn't run at maximum - Protects motor, reduces wear

SERVICE DISPLAY - Control light displays soon before carbon brushes wear out - In-time warning of service need

POWER DISPLAY - Control light displays if electrical current is on - Quick detection of failure source

HEAVY-DUTY METAL GEARCASE - All-metal gearcase - Optimum seating of the gears for enhanced service life

ADDITIONAL STRAIGHT HANDLE - Can be mounted in 3 different positions - Effective, ergonomic handling

SAFETY-CLUTCH - Automatically stops or reduces motor power - Protects user and tool in case of jammed drill bit

VARIOLOCK - Chiselling angle can be locked at various positions - Effective, ergonomic handling

SOFTGRIP - Rubber-padded rear handle - Comfortable handling & good grip

SOFTGRIP ADDITIONAL HANDLE - Rubber-padded additional handle - Comfortable handling & good grip



SPECIFICATIONS


Power input 1.300 W

Blow energy 14 J

Drilling dia. in concrete 45 mm

Drilling diameter with tunnel bit 65 mm

Drilling speed (full-load) 450 rpm

Drilling speed soft-hammer mode (full-load)) 350 rpm

Blow rate (full-load) 2.840 bpm

Blow rate soft-hammer mode (full-load) 2.200 bpm

Tool reception SDS-Max

The M12™ 1/2" Impact Wrench delivers power and convenience in a compact light weight design. With a powerful impact mechanism that delivers up to 1,000 in-lbs of torque. The tool also has an easy socket insertion/ release and utilizes a 1/2" anvil with friction ring retention. The on board fuel gauge displays remaining run-time, while a built in L.E.D. illuminates work surface
Includes:
Impact Wrench
(2) 12V LITHIUM-ION Batteries
Charger
Carrying Case

Working on all Milwaukee 18V slide-on batteries, LITHIUM-ION or NiCd, the 0880-20 wet/dry vacuum offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A washable, reusable wet/dry filter delivers excellent fine dust collection and does not need to be changed between wet and dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower, and the 1-¼" hose allows standard vacuum attachments to be fastened. It includes vacuum, filter, hose, a crevice tool, and a wide nozzle.

The HACKZALL® M18™ Cordless One-Handed Recip Saw features a compact and light weight design for superior control and versatility. The powerful motor delivers 0-3,000 strokes per minute and a 3/4” stroke length allows for fast cutting through a wide range of material such as wood, metal and PVC. The dual gear anti-vibration system increases control and accuracy. The 2625-21 also features a QUIK-LOK® blade clamp which offers fast and easy blade changes.
Includes
2625-20 HACKZALL® Recip Saw
2 x M18™ 3.0Ah XC High Capacity LITHIUM-ION Battery
1-Hour Charger
SAWZALL® Blade
Contractor Bag

With a powerful M28™ motor, the 0780-20 wet/dry vacuum offers longer continuous run time and higher air power and suction to provide quick and easy removal of dust, debris and water. A washable, reusable wet/dry filter delivers excellent fine dust collection and does not need to be changed between wet and dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower, and the 1-¼" hose allows standard vacuum attachments to be fastened. It includes vacuum, filter, hose, a crevice tool, and a wide nozzle.

FIXTEC SYSTEM - Keyless chuck changing - Fast & easy handling

ANTI-VIBRATION SYSTEM - Significantly reduces vibration - Less strain on joints, more comfortable handling

VARIABLE SPEED - Drilling/chiselling speed increases or decreases with amount of pressure used - Precise drilling/chiselling start and perfect adjustment to the application

HEAVY-DUTY METAL GEARCASE - All-metal gearcase - Optimum seating of the gears for enhanced service life

HEAVY-DUTY METAL MOTORCASE - All-metal motorcase - Exact seating of bearings for reliable function and long service life

QUIK-LOK - Detachable power cable - Fast & easy changing of damaged cables. Various tools can be used with only one cable

SAFETY-CLUTCH - Automatically stops or reduces motor power - Protects user and tool in case of jammed drill bit

ROTO-STOP FUNCTION - Turns off the rotation action - For chiselling applications

VARIOLOCK - Chiselling angle can be locked at various positions - Effective, ergonomic handling

HAMMER-STOP FUNCTION - Turns off the hammering action - For screwdriving applications or drilling without percussion in wood/metal

SERVICE HATCH - Access hatch for servicing (e.g. worn-out carbon brushes) - Few screws for quick & easy serviceability

DEPTH-GAUGE KNOB - Single knob for releasing depth-gauge - Quick scrolling

SOFTGRIP - Rubber-padded rear handle - Comfortable handling & good grip



SPECIFICATIONS


Power input 900 W

Drilling dia. in concrete / wood / steel 32 / 40 / 16 mm

Drilling diameter with core cutter 82 mm

Drilling speed (full-load) 0 - 800 rpm

Tool reception FIXTEC/ SDS-plus

Weight 3.6 kg

Blow energy 3.8 J

ANTI-VIBRATION SYSTEM - Significantly reduces vibration - Less strain on joints, more comfortable handling

ELECTRONIC SOFTSTART - Short delay of full speed - Precise chiseling start

2-SPEED SWITCH - High torque in 1st, and high speed in 2nd gear - Perfect adjustment to the application

VARIABLE SPEED - Drilling/chiselling speed increases or decreases with amount of pressure used - Optimum adjustment

SPEED PRESELECTION - Pre-adjustable maximum speed - Perfect speed setting to the application

HEAVY-DUTY METAL GEARCASE - All-metal gearcase - Optimum seating of the gears for enhanced service life

LOCK-ON FUNCTION - Tool can run without the speed switch being continuously pressed - Less tiring use in continuous applications

SAFETY-CLUTCH - Automatically stops or reduces motor power - Protects user and tool in case of jammed drill bit

REVERSE FUNCTION - Changes drilling direction - For screwdriving applications or getting out jammed drill bits

ROTO-STOP FUNCTION - Turns off the rotation action - For chiselling applications

VARIOLOCK - Chiselling angle can be locked at various positions - Effective, ergonomic handling

HAMMER-STOP FUNCTION - Turns off the hammering action - For screwdriving applications or drilling without percussion in wood/metal

DEPTH-GAUGE KNOB - Single knob for releasing depth-gauge - Quick scrolling

SOFTGRIP - Rubber-padded rear handle - Comfortable handling & good grip



SPECIFICATIONS


Power input 1.010 W

Drilling dia. in concrete / wood / steel 30 / 66 /20 mm

Drilling dia. with core cutter 82 mm

Full-load speed 1st / 2nd gear 0 - 680 / 0 - 2200 rpm

Hammer rate 4000 rpm

Tool reception FIXTEC/ SDS-plus

Weight 2.9 kg

1010 watt sufficient power and torque to drill diameters of up to 40 / 90 mm (with core bit)

Metal gearbox for long service life

D-handle

Hammer-stop function for drilling in wood, ceramics or metal



SPECIFICATIONS


Power input 1010 W

Drill dia. in concrete / stone 35 / 40 mm

Drilling dia. in steel / wood 16 / 50 mm

Full-load speed 1st / 2nd gear 650 / 1.350 rpm

No-load speed 1st / 2nd gear 800 / 1.800 rpm

Tool reception 3 - 16 mm

Static stalling torque 88 / 67 Nm 1./2. gear

Stalling torque 57/ 29 Nm 1./2. gear

Nominal torque 10/ 4,7 Nm 1./2. gear

Weight 4.2 kg

Efficiency 50 %

Voltage 220 - 230 V AC

Amps 4.9 A

28 V Milwaukee High Power Motor, gives corded tool performance
"Battery-Lock-Out" function: prevents from starting the tool unintentionally
Overload protection
Lock-on switch
FIXTEC - Patented nut for fast and easy disc changing
SPECIFICATIONS
Power input 28/3,0 V/Ah
No-load speed 9000 rpm
Disc diameter 115 mm
Cutting depth 28,4 mm
Spindle diameter and thread M 14 Weight (netto) 1,7 kg
1 x Battery,Charger,Hard Carry Case

28 V Milwaukee High Power Motor, gives corded tool performance
High-quality, large-capacity V28 battery packs with fuel gauge for fade free energy transfer and enhanced performance
Heavy-duty high torque 1/2" impact wrench
Forward/Lock/Reverse switch well-positioned for easy operation
Electronic switch with variable speed for improved accuracy and less damage to screw-heads.
Ergonomic Softgrip T-handle design for more comfortable use
Metal gearbox for long service life
2-way flex battery pack allows balance to be adjusted for comfort and optimum access to suit each application
Battery pack voltage / capacity 28 / 3.0 V/Ah
No-load speed 0 - 1.450 rpm
Impact rate under load 0 - 2.450 bpm
Tool reception 1/2" inch
Max. torque 440 Nm
Weight with battery pack 4,1 kg
Includes 2 x Batteries,Charger,Carry Case 5 Year Tool Warranty

4 Tool Power Pack
V28 Percussion Drill
V28 Circular Saw
V28 Sawzall
V28 Worklight
belt clip
V28 Battery (two)
V28 Charger
V28 Contractor Bag

FEATURES
28 V Milwaukee High Power Motor, gives corded tool performance
High-quality, large-capacity V28 battery packs with fuel gauge for fade free energy transfer and enhanced performance
L-SHAPE DESIGN - Drop-motor tool design - Perfect handling with optimised length and balance (center of gravity near hand)
VARIABLE SPEED - Drilling/chiselling speed increases or decreases with amount of pressure used - Precise drilling/chiselling start and perfect adjustment to the application
HEAVY-DUTY METAL GEARCASE - All-metal gearcase - Optimum seating of the gears for enhanced service life
SAFETY CLUTCH - Automatically stops or reduces motor power in the case of a jammed drill bit - Safe operation
REVERSE FUNCTION - Changes drilling direction - For screwdriving applications or getting out jammed drill bits
ROTO-STOP FUNCTION - Turns off the rotation action - For chiselling applications
VARIOLOCK - Chiselling angle can be locked at various positions - Effective, ergonomic handling
HAMMER-STOP FUNCTION - Turns off the hammering action - For screwdriving applications or drilling without percussion in wood/metal
DEPTH-GAUGE KNOB - Single knob for releasing depth-gauge - Quick scrolling
SOFTGRIP - Rubber-padded rear handle -Comfortable handling & good grip
SOFTGRIP ADDITIONAL HANDLE - Rubber-padded additional handle - Comfortable handling & good grip
Voltage 28 V
Drill dia. in concrete / stone 26 mm
Drilling dia. in steel / wood 13 / 30 mm
Drilling diameter with core cutter 68 mm
No-load speed 0 - 1.400 rpm
Tool reception SDS-plus
Battery Capacity & type 3.0 Li-Ion Ah Weight with battery pack 4.1 kg
Blow rate (full-load) 0 - 4.700 bpm
Blow energy 3.2 J

28 V Milwaukee High Power Motor, gives corded tool performance

High-quality, large-capacity V28 battery packs with fuel gauge for fade free energy transfer and enhanced performance

FIXTEC and keyless chuck for comfortable, one-handed bit changing

Exclusive Clip-Lok™ System allows for convenient, hands-free, transportation of the drill and provides a convenient place to position the tool.

20-stage torque adjustment plus additional drilling stage giving greater flexibility and precision whatever the material and screw size

Hammer-drill mode for drilling in masonry and stone

Two-speed planetary synchromesh gear for max. torque

Electronic switch with variable speed for improved accuracy and less damage to screw-heads.

Ergonomic Softgrip T-handle design for more comfortable use

2way-flex battery pack insertion: improved balance and flexibility



SPECIFICATIONS


Battery pack voltage / capacity 28 / 3.0 V/Ah

No-load speed 1st / 2nd gear 0 - 600 / 0 - 1.800 rpm

Hammer rate 27.000 bpm

Drilling capacity in steel / soft wood / masonry 16 / 65 (self feed bit)/ 20 mm

Max. torque - soft joint / hard joint 32 / 75 Nm

Weight with battery pack 3,1 kg

Powerful 1500-watt motor

WCE 30 wall chaser is ideal for the installation of conduit for electrical cables.

The cutting width (26 mm max.) between the two parallel diamond cutting discs can easily be set with the new design stepless adjustment

High Performance electronics with overload protection.

Spindle lock

In line dust extraction connection.



SPECIFICATIONS


Power input 1500 W

Disc diameter 125 mm

Cutting width 15 - 26 mm

Cutting depth 8 - 30 mm

No-load speed 9500 rpm

Weight 4.3 kg

WCE 65 wall chaser is ideal for plumbers and builders for installing waste pipes.

Powerful 2300-watt motor

Cutting width (60 mm max.) between the two parallel diamond cutting discs can easily be set with the new stepless adjustment

Dust extraction connection

Axial rotation of drive unit for optimum cutting into corners

Parallel guide as standard equipment

Spindle lock

High Performance electronics with overload protection.



SPECIFICATIONS


Power input 2.300 W

Disc diameter 230 mm

Disc diameter (concrete) 200 mm

Cutting width 17 - 56 mm

Cutting depth *(with 200 mm disc) 10 - 65 (0 - 50)* mm

No-load speed 1st / 2nd gear 6600 rpm

Weight 8.7 kg

Sturdy 1900-watt motor with large power reserves

The cutting width (45 mm max.) between the two parallel diamond cutting discs can easily be set with the new design stepless adjustement

Dust extraction connection

Ergonomic Softgrip for comfortable use

Spindle lock

Unique Swing-Grip adjustable handle for optimum user comfort whatever the cutting application

Four roller

delivered with two 150 mm diamond discs



SPECIFICATIONS


Power input 1.900 W

Disc diameter 150 mm

Cutting width 6 - 45 mm

Cutting depth 0 - 45 mm

No-load speed 5.800 rpm

Weight 6,6 kg

Voltage 220 - 240 V AC

Panasonics EY7840LZ2S 14.4V SDS Plus Rotary Hammer is a versatile tool built powerful and tough in a compact lightweight frame, focused on delivering continuous drilling into concrete, brick and block

14.4V Angle Grinder (Tool Body Only)
Panasonics EY4640X 14.4V grinder delivers high speed metal cutting and grinding in a compact, lightweight tool.

High Capacity 3.0 Ah Li ion Battery
High Power: - 185 Nm
Light weight: - 1.50Kg
Compact Body: - Length 167 mm
Brushless Motor & Electronic switch
Voltage (V) 14.4
Battery Type Li-Ion
Amps (Ah) 3.0
RPM High (no load) 2300
RPM Medium (no load) 1400
RPM Low (no load) 1000
Max Torque Impact (Nm) 185
Weight (kg) 1.50
Height (mm) 222
Length (mm) 167
Width (mm) 60
Charge Time (min) 50
Chuck Type 1/2" SQ
Impacts per minute (High) 3000
Impacts per minute (Low) 2000

High Power
Less weight 3.8kg
Large capacity 3.0 Ah Li ion batteries
Dust proof switch
Slow start for accurate drilling

-The Ultimate Cauking Gun For All 600ml Sausages.
-High Capacity 3.3Ah 14.4v Lithium Ion Battery
-Auto Return Mechanism For No Drip Performance
-Full Metal Gearbox
-Variable Speed Control

1 x 14.4v Drill Driver Skin
1 x 14.4v Impact Driver Skin
1 x 14.4v Rotary Hammer Skin
3 x 3.3Ah Batteries
1 x Charger
1 x Panasonic Carry Bag

MODELTM10 PIST. DIST. 302 MOTOR 1.5 VOLTS 240 CYLINDERS 2 MAX. PRESS. 145 psi RECEIVER
LITRES APPROX. 45ltr SIZE (mm)
L x W x H APPROX.
1050x460x720

Lighweight, fully automatic powder actuated tool with 10 fastener magazine for high volume applications. This tool fastens up to 700 nails per hour for increased productivity. Easy drop in magazine for one handed operation. A power adjuster provides variable power choices and drives a wide variety of fasteners

The PA3500™ is a modified version of the P3500 that includes a power adjuster, allowing the operator to effectively decrease the power level of the load being used. A red load can be toned down to the level of a green

The latest technology in forced entry fasting systems. Trak It allows general contractors and specific trades to fasten timber to steel, steel to steel, timber to concrete, steel to conrete just to name a few. The unique TI-C tool has a proprietary fuel cell that combusts in a controlled chamber, driving the positon into the head of the nail creating a secure fix. The TI-C tool can shoot pins from 12mm through to 38mm and has a magazine capacity of 40 pins.

A high performance fastening device with particular application for the drywall industry. The broad range of pins and patented Stick-E™ accessories make it a versatile solution for many applications.

BONUS STIRRING ROD FREE

Special design of gears - totally stable operation assured
Robust design for site application, with powerful 1500 W motor
Extra handy and easy to control due to princip of cross-handle
Soft start electronics prevent materials splashing at start-up
Electronic speed control - stirrer rotational speed optimization for any mixture
Long living due to reinforced drive spindle and spindle bearing
Rated input 950 W
No-load speed 260 - 700 min[-1]
Spindle with inner thread M14
Collar 57 mm
Weight 4,3 kg

Important characteristics:
Special design of gears - totally stable operation assured
Robust design for site application, with powerful 1500 W motor
Extra handy and easy to control due to princip of cross-handle
Soft start electronics prevent materials splashing at start-up
Electronic speed control - stirrer rotational speed optimization for any mixture
Long living due to reinforced drive spindle and spindle bearing.
NEW SOUTH WALES DELIVERY ONLY

Extra-powerful 1500 W motor - guaranteed excellent reliability and working performance
Dual-speed gears - high torque, designed for heavy or high-viscosity mixtures
Electronic speed control - stirrer rotational speed optimization for any mixture
Soft start electronics prevent materials splashing at start-up
Ergonomic, balanced design of the handles - less effort needed for operation of the stirrer
Rated input 1500 W
No-load speed 1st gear 130 - 300 min[-1]
No-load speed 2nd gear 300 - 650 min[-1]
Spindle with inner thread M14
Collar 57 mm
Weight 6,8 kg

Accu-battery voltage 18 V / Li-Ion 2,6 Ah
No-load speed 1st gear 0-400 min[-1]
No-load speed 2nd gear 0-850 min[-1]
No-load speed 3rd gear 0-1850 min[-1]
No-load speed 4th gear 0-3800 min[-1]
No-load Impact frequency 1st gear 0-8000 min[-1]
No-load Impact frequency 2nd gear 0-17000 min[-1]
Impact count 3rd gear 0-37000 min[-1]
Impact count 4th gear 0-76000 min[-1]
Torque hard/soft 60/40 Nm
Drilling (wood/steel) 50/12 mm
Drilling diameter in brickwork 10 mm
Chuck clamping range 1,5-13 mm
Weight with CENTROTEC and battery pack 1,9 kg
Brushless EC motor for maximum service life, extremely efficient
Lithium ion battery for maximum power density at minimum weight
EC motor combined with lithium ion battery for almost 100% greater fastening capacity
4-speed gearbox capable of 3800 rpm for rapid, clean drilling results
Axial impact feature (PDC) that can be deactivated for drilling in brickwork

Important characteristics:
Diamond grinder operates at the perfect speed for diamond tools
1,600 W motor for rapid material removal and working progress
Folding segment allows you to work directly on walls
Integral wall stop for safe, rapid working on walls
Efficient dust extraction and automatic seal with guard
Perfect handling and balance on floors, walls and ceilings
Manually adjustable VIBRASTOP auxiliary handle

Accessories included:

Basic machine
Diamond disc DIA ABRASIV-RGP 130
Flange set
Face pin wrench
Technical data
Rated input 1600 W
No-load speed 3000-7700 min[-1]
Tool grind/cut diameter 130 mm
Tool reception D25/M14
Connection Ø d/e 36 mm
Weight 3,8 kg

Important characteristics:
3 counter-rotating grinding discs - effortless control of the machine, perfect grinding results
Detachable guard allows for working right into corners or onto edges
Easy tool replacement, made simple with the integral spindle lock
Good visibility and clean air due to dust extraction attachment
Perfect handling due to "Vibrastop" auxiliary handle with polyurethane sleeve
Easy operation for use in hard-to-get-to places (over head, in the corners, angles, edges) due to compact construction and easy operation system

Accessories included:

Grinding discs SET Diamond Abrasiv (1x Ø 35 mm, 2x Ø 44 mm)
Dust-extraction attachment
Auxiliary handle
Systainer

Important characteristics:
Universal renovation miller operates at the perfect speed for machining soft materials, option of using DIA tools
Compact, flexible and powerful machine with 1,100 W motor
Constant speed under load due to MMC Electronic
Electronic monitoring of winding temperature, prevents thermal deterioration of the motor
Regulated electronics for constant speed
Supporting base with smooth cutting 0 - 3.5 mm depth adjustment ? for safe operation
Dust extraction - clean work place
Perfect handling due to "Vibrastop" auxiliary handle with polyurethane sleeve
Quiet operation and minimal vibration due to oscillation attenuation

Accessories included:

Basic machine
Tool head SZ-RGP 80
Auxiliary handle VIBRASTOP
Allen key 4

Technical data

Rated input 1100 W
No-load speed 2000-5900 min[-1]
Tool grind/cut diameter 80 mm
Spindle thread 2 x M5
Connection Ø d/e 36 mm
Weight 3,2 kg

Important characteristics:
Maximum utilisation of filter bag capacity due to new, innovative design principle. Maximum net capacity for a small container.
Integration of a filter element in the extractor head for protection against damage caused by sharp particles.
Comfortable extraction due to automactics with reaction time running/retardation
High suction performance, high vacuum depression and cubic flow due to powerful turbine.
Blow function with end cap on the rear of the housing.
Wheels with locking brake provide stability when transporting the extractor in a vehicle or using on scaffolding.
Filter cartridge made from dirt-resistant PES filter material. Dirt-resistant, washable and durable, minimises operating costs.

Accessories included:
Long Life Re Usable Filter Bag
Suction hose Antistatic Ø 27 mm x 3.5 m with rotary connection hubs
double-wall filtering bag
Antistatic packet
Dust category L
Technical data
Input Pmax. 1200 W
Container capacity 32 l
Input Piec 1100 W
Airflow max. 3000 l/min
Depression 20000 Pa
Vessel filter capacity 3600 cm2
Onboard socket input max. 2400 W
Power cord 7,5 m
Weight 9,3 kg

Automatic levelling, two laser beam cross linear.
Gravity pendulum levelling system used for quick set up time.
Very wide fan angle in both directions.
Two laser beams for constant beam quality.
Multi function base for different mounting options or for projecting sloped lines on walls and ceilings.

• Maximum Torque:850Nm
• Solid composite body
• Single lever controller for the air regulation and the reverse function
• Full reverse air regulation system.
• Twin hammer clutch makes a big torque

Stonger, Lighter, More Compact. Easily the lowest vibration machine in its class with a staggering 40% reduction in vibration.

Technical Data
Model TS 420
Cutting Depth (mm) 125mm
Displacement (cm 3) 66.7
Power (kW) 3.2
Standard Cutting Wheel (mm) 350
Weight (kg) 9.6

Includes Diamond Wheel 350mm

STIHL's most powerful cut-off saw ever. Intelligently designed for both manual or cart-based operation, it has a state-of-the-art low emission engine and anti-vibration system. Users will value the smart controls and easy starting features.


Technical Data

Model TS 700
Cutting Depth (mm) 125
Displacement (cm 3) 98.5
Power (kW) 5.0
Standard Cutting Wheel (mm) 350
Weight (kg) 11.6

State-of-the-art cutquik with ultra long life air filtration and advanced low-emission, low vibration design. Ideal for use with quick mount FW 20 trolley.


Technical Data

Model TS 800
Cutting Depth (mm) 143
Displacement (cm 3) 98.5
Power (kW) 5.0
Standard Cutting Wheel (mm) 400 Weight (kg) 12.7

BMI TopoMat Self Levelling Rotary Laser Level Set ? includes Remote, Wall Mounting Bracket, Staff Bracket, Receiver, Beam Splitting Prism and Inclination Measure

Model-TPV300SET
Suitable for Air/Fume Extraction or Blowing Fresh Air.
Ideal ventilation for workshops and confined areas.
• 300mm Diameter Ventilators Available
• Large Capacity Motor Creating a Very High Flow Rate
• Specially designed Axial Propeller
• High Static Pressure
60m³/min
550w 240V
2900rpm
16.0kg
SYDNEY METRO DELIVERY ONLY ON THIS ITEM

These engine powered cold water blasters are built to the highest standards with no compromise in design details.Petrol Engine drive makes them mobile and removes the problems of locating a suitable electric source. Powerful “Big Berty” Bertolini pumps provide pressures from 3,000 to 5,000 psi combined with heavy duty, reliable engines.
Applications
• Contract cleaning
• Construction
• Mine site cleaning
• Machinery wash down
• Graffiti removal
Specifications
-13hp Honda GX390 Engine
-3000psi Pump Pressure
-4785psi With Turbo Lance ( supplied )
-15ltr per min Flow
-90kg

High speed engine drive cold water blasters (AB Series)
These engine powered cold water blasters have been designed to provide cleaning professionals with units built tough for Australian conditions. Powerful “Big Berty” Bertolini triplex pumps provide pressures from 2,000 to 4,000 psi combined with the heavy duty industrial Honda petrol engines
Specs
-2750psi Pump Pressure
-4125psi Turbo Pressure ( included )
-9lpm Flow
-Honda GC160 5hp Petrol Motor
-40Kg
Applications
• Home use
• Farm use
• Cleaning contractors
• Schools
• Construction/building industry

This machine is ideal for the domestic user who is looking for a commercial grade machine that is cost effective, reliable and that will provide years of service. With an effective working pressure of 3,000 psi when used with the Turbomaster lance, this machine has a brass pump head to give lasting performance.
• Clean up around the home
• Car washing
• Patio cleaning
• Washing down gutters
• Drain clearing
SYDNEY METRO DELIVERY ONLY

Professional 240 volt, 4 pole, 1450 rpm slow speed, cold water high pressure cleaning machines. Rugged machines made for tough Australian cleaning applications with the ease of standard 240 volt supply.
Pressures to 2,000 psi (EWP 3,400 psi with turbo) and flows to 11 litres per minute.
Bonus Turbo Nozzle

Stella 100TS Hot Water Blaster

140deg Hot Water
1500psi Pump Pressure
11ltr/min Flow
2.2kw 240v Electric Motor
1450rpm
120kg
Diesel Powered Boiler with Stainless Steel Coil