Includes
Phillips Bits: 1" - (1) P1, (7) P2, (2) P3; 2" Power - (2) P2, (1) P3
Square Bits: 1" - (1) SQ1, (4) SQ2, (1) SQ3; 2" Power - (2) SQ2
Torx® Bits: 1" - (1) T15, (1) T20, (1) T25; 2" Power - (1) T25
Magnetic Nut Drivers: (1) 1/4" Red, (1) 5/16" Amber, (1) 3/8" Blue
(1) Magnetic Bit Holder
(1) Case with Bulk Storage Container

NEW MODEL-NEW MODEL-NEW MODEL
NEW HEAVY DUTY MOTOR OVER 40% MORE POWER THAN THE AS160.
DUST SEALED MOTOR,IMPROVED CUTTING SPEED.
Details.
120mm Depth Of Cut
1250watt Motor
Auto Cut Off Brushes
4.3kg
5100rpm
240volt

• Measures angles in ° or inclines in %
• Acoustic signal at 0° or 90°
• Direction arrows display the deviation to the horizontals or verticals
Length: 600 mm
Measurement range: 360° (4 × 90°)
Electronics measuring accuracy 0°/90°: ± 0.05°
Electronics measuring accuracy at 1°-89°: ± 0.2°
Measurement accuracy, bubble levels: 0.057° = 1 mm / m
Power supply: 9 V 6LR61 (Block)
Operating duration approx.: 200 H
Automatic deactivation facility, approx.: 5 min
Weight approx.: 0,7 kg
Width: 25 mm
Height: 60 mm

Features:
- Measures angles in ° or inclines in %
- Acoustic signal at 0° and 90°
- Direction arrows display the deviation to the horizontals and verticals
- Automatic rotation of the measured values when working overhead
- Hold function to hold measuring results at the push of a button
- Slanted, easy-to-read display
- Sturdy and handy
- 2 vials enable use as a spirit level
Measuring range: 360° (4 x 90°)
Measurement accuracy, Electronic 0°/90°: ± 0.05°
Measurement accuracy, Electronic at 1° - 89°: ± 0.2°
Measurement accuracy, bubble levels: 0.057° = 1 mm / m
Power supply: 9 V 6LR61 (Block)
Operating duration approx.: 200 H
Automatic deactivation facility, approx.: 5 min.
Weight approx.: 1,3 kg
Width: 25 mm
Height: 60 mm

Extremely accurate angle calculation
• Faster, more precise and more efficient calculation of angles
• Precise transfer of the angles onto workpieces
• The greatest accuracy over the long term due to the integrated, wear-free and temperature-independent Bosch Precision Angle Sensor
Measurement range: 0 – 220°
Measurement accuracy: ± 0.1°
Measurement accuracy, bubble levels: 0.057° = 1 mm / m
Power supply: 4x 1.5 V LR6 (AA)
Automatic deactivation facility, approx.: 5 min
Staple length: 40 cm
Length: 400 mm
Weight, approx.: 1,0 kg
Width: 33 mm
Height: 60 mm

• The DD500X shop model is designed for durability and has the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits-including split points and masonry bits.
• Increase capacity with 3/4" chuck accessory.
• New "Push to Stop" design on the drill point splitting port will not allow you to over split the bit point.
• User replaceable sharpening wheel design for simple replacement.
• One piece alignment system improves precision, and adjustability.
• Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits.
• For the serious drill bit user, DIY, hobbyist, and professional
• Sharpens 3/32" - "1/2" drill bits
• Sharpens High-speed Steel, Carbide, Cobalt, TiN-coated and Masonry bits
• Can sharpen 3/32" - "1/2" reverse-twist (left-hand) drill bits with optional accessory
• Includes professional hard-shell carrying case

• The DD750X shop model is designed for durability and has the flexibility required to sharpen the largest range of dull or broken bits-including split points and masonry bits.
• The DD750X also adds increased capacity, sharpening "1/2" to "3/4" bits.
• One chuck sharpens all sizes 3/32"-3/4"
• Longer jaws hold bit more precisely and jaw guides eliminate jaw twisting on small bits.
• New "Push to Stop" design on the drill point splitting port will not allow you to over split the bit point.
• Adjustable material take-off allows user to change the amount of bit material that can be removed to further extend the life of your bits.
• User replaceable sharpening wheel design for simple replacement.
• Cast aluminum point angle shuttle for added durability.
• New permanent magnet motor produces consistent power, regardless of speed or load.
• Sharpens High-speed Steel, Carbide, Cobalt, TiN-coated and Masonry bits
• Can sharpen 3/32" - "1/2" reverse-twist (left-hand) drill bits with optional accessory
• Includes professional hard-shell carrying case

The all-round carefree package with which all applications can be carried out professionally in interior fittings, renovation and hobbies
1 FEIN MULTIMASTER FMM 250 Q quick action system in a sturdy plastic case
1 x BONUS NEW SANDING PAD

Practical for setting down tools and drawings on, or for making quick notes. Just like all tables. But you expect something different from Festool: Tools and accessories that facilitate your everyday work, developed by experts for practical applications, and integrate perfectly into the Festool system. And all of this in the highest quality.
PLEASE CALL IF ANY QUESTIONS

technical data
Power consumption 1200 W
Idle engine speed 1900-5200 min­¹
Cutter diameter 118 mm
Routing depth 0-9 mm
Connection dia. d/e 27/36 mm
Weight 5,4 kg

Power consumption 1400 W
Rated belt load 230-380 m/min
Belt idling speed 230 - 380 m/min
Spread 105 mm
Belt length 620 mm
Sanding area 160 x 105 mm
Connection dia. d/e 27/36 mm
Weight 6,5 kg

Power consumption 1010 W
Rated belt load 150-320 m/min
Spread 75 mm
Belt length 533 mm
Belt idling speed 200 - 380 m/min
Sanding area 135 x 75 mm
Connection dia. d/e 27/36 mm
Weight 3,8 kg

Technical data

no-load speed, 1st gear/2nd gear 0-450/0-1500 min-1
Drilling diameter, wood/steel 25/14 mm
Torque adjustment 0,5-8/0,5-6 Nm
Max. torque, wood/steel 20/34 Nm
Chuck range 1,5-13 mm
2 x Battery capacity Li ion 1,3 Ah
Charging time Li Ion battery pack 20 min
Weight with Li Ion battery pack 1,3 kg
Optional Angle Chuck & Off Set Chuck Available

Technical data
no-load speed, 1st gear/2nd gear 0-450/0-1500 min-1
Drilling diameter, wood/steel 35/16 mm
Torque adjustment 0,5-8/0,5-6 Nm
Max. torque, wood/steel 25/40 Nm
Chuck range 1,5-13 mm
2 x Battery capacity Li ion 2,6 Ah
Charging time Li Ion battery pack 45 min
Weight with Li Ion battery pack 1,6 kg
Optional Angle Chuck & Off Set Adaptors Available

Power consumption 350-1200 W
Airflow max. 3900 l/min
Max. vacuum 24000 Pa
Filter surface area 3060 cm²
Rubber-insulated mains cable 7,5 m
Container/Filter bag capacity 26/24 l
Dimension (L x W x H) 630 x 365 x 540 mm
Maximum wattage of connected tool 2400 W
Weight 13 kg

Power consumption 350-1200 W
Airflow max. 3800 l/min
Max. vacuum 23000 Pa
Filter surface area 14000 cm²
Rubber-insulated mains cable 7,5 m
Container/Filter bag capacity 44/42 l
Dimension (L x W x H) 710 x 380 x 935 mm
Noise at no-load speed 62 dB(A)
Max. appliance socket connected load 2400 W
Weight 20 kg
Includes Cleaning Kit

Power consumption 400-1200 W
Airflow max. 2800 l/min
Max. vacuum 20000 Pa
Filter surface area 5000 cm²
Rubber-insulated mains cable 7,5 m
Container/Filter bag capacity 15/12,5 l
Dimension (L x W x H) 440 x 340 x 470 mm
Max. appliance socket connected load 2400 W
Weight 9,7 kg
Includes Cleaning Kit

Power consumption 400-1200 W
Airflow max. 2800 l/min
Max. vacuum 20000 Pa
Filter surface area 5000 cm²
Rubber-insulated mains cable 7,5 m
Container/Filter bag capacity 10/7,5 l
Dimension (L x W x H) 440 x 340 x 420 mm
Max. appliance socket connected load 2400 W
Weight 9,5 kg
Includes Cleaning Kit

technical data
Power consumption 420 W
Idle engine speed 24300 min­¹
Depth stop for routing depth 12, 15, 20, 25, 28 mm
DOMINO slot cutter dia. 4,5, 6, 8, 10 mm
Height adjustment with scale for router 5-30 mm
Movable stepped stop 16, 20, 22, 25, 28, 36, 40 mm
Mitre routing 0-90 °
Connection dia. d/e 27 mm
Weight 3,2 kg

Power consumption 200 W
Speed 6000-14000 min­¹
No. of strokes 12000-28000 min­¹
Sanding stroke 2 mm
Interchangeable sanding pad 100 x 150 mm
Connection dia. d/e 27 mm
Weight 1,1 kg
IN SYSTAINER

Power consumption 350-1200 W
Airflow max. 3900 l/min
Max. vacuum 24000 Pa
Filter surface area 3060 cm²
Rubber-insulated mains cable 7,5 m
Container/Filter bag capacity 36/34 l
Dimension (L x W x H) 630 x 365 x 596 mm
Maximum wattage of connected tool 2400 W
Weight 13,5 kg
• suction hose Ø 27 mm x 3.5 m long, anti-static

• hose garage

• Cable holder

Power consumption 150 W
Speed 5000-9500 min­¹
Sanding stroke 2,5 mm
Connection dia. d/e 27 mm
Weight 1,5 kg

One handed planer EHL 65 E-Plus AUS
technical data
Power consumption 720 W
Rotational speed 15600 min­¹
Planing width 65 mm
Planing depth 0-4 mm
Max. rebate depth 23 mm
Connection dia. d/e 27 mm
Noise at idling speed 76 dB(A)
Weight 2,4 kg

Power consumption 200 W
Eccentric motion speed 6000-14000 min­¹
Sanding stroke 2 mm
Interchangeable sanding pad dia 125 mm
Connection dia. d/e 27 mm
Weight 1,1 kg

Power consumption 310 W
Eccentric motion speed 6000-10000 min­¹
Sanding stroke 3 mm
Interchangeable sanding pad dia 150 mm
Connection dia. d/e 27 mm
Weight 1,8 kg
Power supply 240 V
Mains frequency 50 Hz

Power consumption 310 W
Eccentric motion speed 6000-10000 min­¹
Sanding stroke 5 mm
Interchangeable sanding pad dia 150 mm
Connection dia. d/e 27 mm
Weight 1,8 kg

NEW NEW NEW NEW NEW NEW NEW
Technical Data
Battery voltage 14,4 V
Stroke rate 1000-3800 min-1
Pendulum cover adjustment in stages 4
Cutting depth in wood 120 mm
Cutting depth in NF metals 20 mm
Cutting depth in steel (soft) 10 mm
2 x Rechargeable battery capacity
2,6 Ah
Weight 2,3 kg
BONUS 5PCE JIG SAW BLADE SET INCLUDED

technical data
Power consumption 720 W
Stroke rate 1000-2900 min­¹
Pendulum cover adjustment in stages 4
Inclination 0-45 °
Cutting depth in wood 120 mm
Cutting depth in NF metals 20 mm
Cutting depth in steel (soft) 10 mm
Weight 2,4 kg
Power supply 240 V
Mains frequency 50 Hz

technical data
Power consumption 720 W
Stroke rate 1000-2900 min­¹
Pendulum cover adjustment in stages 4
Inclination 0-45 °
Cutting depth in wood 120 mm
Cutting depth in NF metals 20 mm
Cutting depth in steel (soft) 10 mm
Weight 2,4 kg

NEW HOT PRICE AND BONUS BLADE FREE
Greater cutting capacity, more compact design.
Finally there is a sliding compound mitre saw that combines a large cutting capacity with a compact, lightweight design, achieves the precision needed for high-quality results and offers innovative solutions that would inspire any professional user. Why not try it for yourself !

Limited Time Only At This Price

The New FESTOOL Kapex Site Spec Saw
SPECIFICATIONS
Power consumption : 1600 W
Idle engine speed : 1400-3400 min-1
Saw blade diameter : 260 mm
Cutting depth 90°/90° : 305 x 88 mm
Cutting depth at 45°/90° : 215 x 88 mm
Cutting depth 50°/90° (left) : 196 x 88 mm
Cutting depth 60°/90° (right) : 152 x 88 mm
Cutting depth 45°/45° (left) : 215 x 55 mm
Cutting depth 45°/45° (right) : 215 x 35 mm
Inclination angle : 47/47 °
Mitre angle : 50/60 °
Bench height (on MFT) : 923 mm
Dimensions (W x D x H) : 713 x 500 x 470 mm
Connection Ø d/e : 27/36 mm
Weight : 20,7 kg
Includes:
HW universal saw blade W60
Workpiece clamp
Operation tool
SYDNEY METRO ONLY

Power consumption 260 W
Speed 4000-6000 min­¹
No. of strokes 8000 - 12000 min­¹
Sanding stroke 4 mm
Interchangeable sanding pad 133 x 80 mm
Connection dia. d/e 27 mm
Weight 1,7 kg

technical data
Power consumption 1010 W
Idle engine speed 10000-24000 min­¹
Routing depth adjustment range 55 mm
Fine height adjustment range 8 mm
Connection dia. d/e 27 mm
Weight 2,7 kg
Power supply 240 V
Mains frequency 50 Hz

technical data
Power consumption 1400 W
Idle engine speed 10000-22500 min­¹
Routing depth adjustment range 70 mm
Fine height adjustment range 8 mm
Connection dia. d/e 27/36 mm
Weight 4,5 kg
Power supply 240 V
Mains frequency 50 Hz

Edge Trimmer/Router
Power consumption 720 W
Speed 10000-26000 min­¹
Clamping width 5 mm
Maximum cutting depth, vertical 9 mm
Maximum cutting depth, horizontal 5 mm
Max. routing width max. 14 mm
Weight 2 kg
Power supply 240 V
Mains frequency 50 Hz

Strengths and benefits

Powerful low-end torque for rapid sawing progress - with cable and cordless versions
Excellent behaviour in curves thanks to threefold saw blade guide and rigid lifter rod
Fast, tool-free changing of tables, baseplates and saw blades
Simple handling thanks to the softgrip and ergonomic design
El. switch-on/off on both sides reachable in every grip pos.
Energy saving low weight: only 1.9 kg with cable; 2.3 kg with battery
Easily visible scribe mark through stroboscope light and powerful extraction
Tool length can be shortened by swivellable plug it-cable

technical data
Power consumption 850 W
Rotational speed 11000 min­¹
Planing width 82 mm
Planing depth 0-3,5 mm
Max. rebate depth ? mm
Connection dia. d/e 36 mm
Noise at idling speed 79 dB(A)
Weight 3,9 kg

Gyprock & Timber Floor Sander

PLANEX + CT26 + 25-180grit Discs
The new PLANEX really gets stuck in, removing up to 30 kg of material per hour. That's why we recommend that it's only used with the new PLANEX special extractor CT26LLF. Designed specifically for extracting fine dust, this manoeuvrable extractor follows your every move, providing maximum efficiency and constant suction power. It delivers excellent results, a clean building site and most importantly, a healthy working environment.
We recommend that you always use a class M extractor when working with the PLANEX long-reach sander LHS 225

One machine adjustable to three different lengths due to the quick-release attachment system (1.1m, 1.6m and 2.1m)
Massive material removal capacity due to perfectly meshed together robust steel gears
Outstanding results with minimum effort due to suction power
Convenient transportation and tidy storage due to the Maxi Systainer
Twice as efficient compared with an equivalent drywall sander (up to 30kg dust per hour)

Power consumption 500 W
Speed 1350-3800 min­¹
Grinding disk Ø 115 mm
Spindle thread M14
Connection dia. d/e 27 mm
Weight 2,3 kg
Power supply 240 V
Mains frequency 50 Hz

Power consumption 1500 W
Speed 550-2650 min­¹
Grinding disk Ø 180 mm
Spindle thread M14
Connection dia. d/e 27 mm
Weight 4,2 kg

90mm Gear-driven eccentric sander
Strengths and benefits:
Four tools in one: for coarse sanding, fine sanding, Delta sanding and polishing. Resulting in low investment costs and savings on working time
High material removal rate thanks to ROTEX cam track
First-class surface results through eccentric motion
FastFix sanding pad system, tool-less
Effortless work thanks to a weight <1.5 kg
Numerous gripping positions thanks to slim, ergonomic shape

Three tools in one: coarse sanding, fine sanding and polishing on vertical or narrow surfaces, above head height and around tight curves.
Compact, extremely manoeuvrable ROTEX, lightweight and very versatile.
Toolless FastFix sanding pad change system simplifies pad changing and saves time.
Excellent surface quality due to MMC electronic system, sanding pad brake and smooth-running pad.
For left and right handers: Softgrip ensures a safe, comfortable grip.
Dustproof gear casing and floating switches ensure trouble-free work

Coarse sanding, fine sanding, polishing
ROTEX rotary motion for efficient material removal
Eccentric motion for high-quality, scratch-free surfaces
FastFix sanding pad system, tool-less
Sanding up to the edge thanks to the Festool PROTECTOR
Ideal ergonomic grip positions

Power consumption 2200 W
Idle engine speed 10000-22000 min-1
Routing depth adjustment range 80 mm
Fine height adjustment range 1/10 mm
Cutter diameter 89 mm
Connection Ø d/e 36 (27) mm
Weight 7,8 kg

Power consumption 620 W
Speed 6300 min­¹
Max. speed 10000 min­¹
No. of strokes 12600 min­¹
Sanding stroke 5 mm
Interchangeable sanding pad 115 x 225 mm
Connection dia. d/e 27 mm
Weight 3,0 kg

Power consumption 620 W
Speed 6000 min­¹
Sanding stroke 5 mm
Interchangeable sanding pad 115 x 225 mm
Connection dia. d/e 27 mm
Weight 3,3 kg

Power consumption 330 W
Speed 4000-10000 min­¹
No. of strokes 8000 - 20000 min­¹
Sanding stroke 2,4 mm
Interchangeable sanding pad 115 x 225 mm
Connection dia. d/e 27 mm
Weight 2,5 kg

Power consumption 280 W
Speed 4000-10000 min­¹
Sanding stroke 2,4 mm
Interchangeable sanding pad 93 x 175 mm
Connection dia. d/e 27 mm
Weight 2,3 kg

Power consumption 200 W
Speed 6000-14000 min­¹
No. of strokes 12000-28000 min­¹
Sanding stroke 2 mm
Interchangeable sanding pad 80 x 130 mm
Connection dia. d/e 27 mm
Weight 1,1 kg

Power consumption 1010 W
Idle engine speed 250-600 min-1
Connecting thread M14
Weight 4,2 kg
Power supply 240 V
Mains frequency 50 Hz

Includes
Sliding Table,Side Extention Table,Rear Extention Table,Duel Locking Rip Fence,Duel Dust Extraction Hose Set,Mitre Guide.

Power consumption 1200 W
Idle engine speed 1600-4200 min­¹
Saw blade diameter 190 mm
Cutting height
Cutting depth 90°
Cutting depth at 45 degrees
Cutting height 90°/45° 0-52/0-37 mm
Inclination
Cutting path 304 mm
L. of cut x mat. thickness 294 x 16 mm
Table dimensions 585 x 400 mm
Working height (folded away) 316 mm
Working height with legs 900 mm
Connection dia. d/e 27/36 mm
Weight 17,4 kg
Weight (including foldaway legs) 19,5 kg

Includes
Sliding Table,Side Extention Table,Rear Extention Table,Duel Locking Rip Fence,Duel Dust Extraction Hose Set,Mitre Guide.

Power consumption 2200watt 3hp
Idle engine speed 2000-4200 min­¹
Saw blade diameter 225 mm
Cutting height 0-70 mm
Cutting depth at 45 degrees 0-48 mm
Cutting height 90°/45° 0-70/0-48 mm
Inclination 0-45 °
L. of cut x mat. thickness 320 x 16 mm
Table dimensions 690 x 500 mm
Working height (folded away) 375 mm
Working height with legs 900 mm
Connection dia. d/e 27/36 mm
Weight 34,5 kg

Brushless EC-TEC motor with integrated motor management for long service life and the highest output
Impressive ergonomics: Compact, lightweight and perfectly balanced
Fully electron torque setting and switch-off for precise fastening
Switch over from fastening to drilling without changing the torque setting
FastFix interface for all FastFix attachments and CENTROTEC rapid tool-change system
Latest Lithium-ion battery technology for the longest sustained usage
no-load speed, 1st gear/2nd gear 0-450/0-1500 min-1
Drilling diameter, wood/steel 25/14 mm
Torque adjustment 0,5-8/0,5-6 Nm
Max. torque, wood/steel 22/30 Nm
Chuck range 1,5-13 mm
2 x 2,6 Ah Battery
Charging time Li Ion battery pack 45 min
Weight with Li Ion battery pack 1,4 kg
Optional Angle Chuck & Off Set Chuck Available

technical data
no-load speed, 1st gear/2nd gear 0-450/0-1500 min-1
Drilling diameter, wood/steel 35/16 mm
Torque adjustment 0,5-8/0,5-6 Nm
Max. torque, wood/steel 27/40 Nm
Chuck range 1,5-13 mm
2 x Battery capacity Li ion 2,6 Ah
Charging time Li Ion battery pack 45 min
Weight with Li Ion battery pack 1,5 kg
Optional Angle Chuck & Off Set Chck Available

FastFix: quick and easy saw blade changing and adaptation to the working material
Spring-loaded riving knife for unhindered plunge cuts
Attachable splinterguard for high-quality working results
Quick-acting brake system for safe, convenient sawing
Tool-less play setting on the guide rail

Power consumption 1600 W
Idle engine speed 1350-3550 min­¹
Saw blade diameter 210 mm
Cutting depth 0-75 mm
Cutting depth at 45 degrees 55 mm
Cutting depth at 90°/45° 0-75/0-55 mm
Inclination 0-47 °
Connection dia. d/e 27/36 mm
Weight 6,2 kg

Power consumption 400 W
Eccentric motion speed 2600-6000 min­¹
Sanding stroke 7 mm
Interchangeable sanding pad dia 150 mm
Connection dia. d/e 27 mm
Weight 1,9 kg
Power supply 240 V
Mains frequency 50 Hz

10 pce Mega Kit

4 x Battery 18 volt 3.0Ah Li-ion
Standard Accessories
Charger and 2 heavy duty on site carry bags
Charger_ChargingTime 45 mins


DV18DL: Cordless Hammer Driver Drill
WH18DL: Cordless Impact Driver
C18DL: Cordless Circular Saw
CR18DL: Cordless Reciprocating Saw
G18DL: Cordless Grinder
DH18DL: Cordless Rotary hammer
CJ18DL: Cordless Jig saw
RB18DL: Cordless Blower
UB18DL: Lantern
UB18D: Torch

Chuck 16mm
Weight 75kg
Input 750 watt Induction motor
Table Length 336mm
Table Width 336mm
Machine Length 1618mm
Drill Depth 190mm (Throat)
Table Tilt 45° Left or Right
Capacity Swing 380mm
Spindle Travel 85mm
Rotation Speed 12 speed, 210 - 2,580 rpm
Standard Accessories Chuck key, wedge (Drift), hex key
Patented X-Y laser guide. Enable rapid and accurate pre alignment of drilling location
12 speed design with quick reference guide for easy speed select
Depth adjustment gauge
Durable cast iron table surface
380mm swing
85mm spindle travel (quill travel)
Self ejecting chuck key for added safety
Also accepts Morse taper drill bits (no 2)
Safety switch with removable key

No Load Speed 5500 /min
Weight 14kg
Blade Diameter 216mm (81/2")
Power Input 1050 Watts
Max Cut Size 65mm x 312 mm
Mitre Cut 45 Degrees 65mm x 220mm
Bevel Cut 45 Degrees 45mm x 220mm
Dimensions (W) 555mm (L) 790mm (H) 485mm
Standard Accessories Dust bag, Vice Assembly & Box Wrench
SYDNEY METRO DELIVERY ONLY

H65SB2
Demolition Non-Rotary Hammer
Description:
Strongest demolition power and durability in this class
Low noise and vibration level
Triple dust sealed, double insulated design
Comfortable shock absorbing handles
Robust construction for longer life
High impact energy: 42 joules
Strong alloy motor housing
Specification:

Chuck 30mm Hex
Length 726mm
Weight 16.5kg
Impact Rate 1400bpm
Brush 999086
Power Input 1400 watts
Standard Accessories Bull Point, hexagon bar wrench, carry case, chisel

Chuck 28mm Hex
Length 880mm
Weight 32kg
Impact Rate 850bpm
Brush 999074
Power Input 1650 watts
Standard Accessories 3 spanners
Designed for heavy demolition work: concrete, road base, masonry and stone material
Ideal substitute for air operated, compressor equipment where access is difficult
Comfortable shock absorbing handles
More impact energy: 55 joules
Hexagon Drive

Maximum output 5000W/240 Volt AC. Rated output 4500W
Delivers greater fuel efficiency via the built-in Eco-Throttle
“I-Monitor” self-diagnosis function protects your investment
Environmentally friendly with low exhaust and noise emissions
Starts first time, every time with convenient electric start and recoil start back-up

Maximum output 6500W/240 Volt AC. Rated output 5500W
Delivers greater fuel efficiency via the built-in Eco-Throttle
Quiet operation at 69dB (A)
“I-Monitor” self-diagnosis function protects your investment
Starts first time, every time with convenient electric start and recoil start back-up
The EM65is is the largest capacity inverter generator in its class and builds on advanced technology used in Honda’s extremely popular EU Series generators.

Equipped with Honda’s revolutionary ECO-Throttle system the EM65is automatically adjusts the engine’s rpm to generate only as much power as required by the appliance, thus reducing fuel consumption by approximately 10% compared to conventional generators.

An innovation on this EM inverter generator is a new ‘i-Monitor’ LCD which gives the operator fingertip access to information about the generators’ performance. The ‘i-Monitor’ feature acts as an hour meter displaying hours of operation, generator output, engine speed and the battery voltage. It also boasts an overload warning light which flashes if the generator is overloaded or if its temperature rises abnormally. In this unlikely event, the generator will automatically switch off. An engine oil level warning is also provided by the ‘i-Monitor’ and the engine will shut down when the level is low.

The EM65is features an electric start with recoil back-up and is equipped with wheels and a fold-up handle for easy transportation.

It is the perfect generator for powering larger appliances and will run anything from a circular saw to the most sophisticated computer equipment.
SYDNEY METRO DELIVERY ONLY

The EU30is features a microcomputer-controlled sinewave inverter that guarantees commercial-quality electricity – making it ideal for use with frequency sensitive electrical equipment such as computers.

It also uses a high-speed multi-point alternator that is integrated into the engine itself. This Honda developed technology reduces the overall weight and size by 25% to 50% compared to similarly classed conventional models, making it very portable.

The EU30is also features an Eco-throttle which adjusts the engine speed to meet the load demand. This increases fuel economy whilst also reducing noise as the engine is not required to run at full capacity unnecessarily.

The generator is Parallel Connection capable. This feature allows two EU30i’s to be quickly and easily linked using a special parallel connection cable to double your output to 6Kva. With electric-starting and enough power to be used in a wide range of home, recreational and professional uses, the EU30is incorporates all of Honda’s portable power technology.
12 Amp/12 Volt DC, maximum 3000W/240 Volt AC
Delivers greater fuel efficiency via the built-in Eco-Throttle
New high-speed multi-point alternator is integrated into the engine to reduce size and weight
Delivers better than commercial quality electricity
Starts first time, every time with convenient electric start and recoil start back-up
SYDNEY METRO DELIVERY ONLY
INCLUDES PRE DELIVERY

The EU30iu has a light,Compact bodyfor handy carrying plus low noise for convenience as well as an increased ease of use.
Built in wheels & trolley handle kit
Maximum 3000watt usable power
Quiet 57db noise level
Low oil alert protects engine
only 35kg

6 Amp/12 Volt DC, maximum 700W/240 Volt AC
High-quality electricity is generated via the built-in cyclo-converter
Whisper-quiet 56dB (A)
Lightweight 12kg
Up to 4.5 hours of continuous operation on a full fuel tank
Portable electric power continues to grow in popularity as more and more electronic devices and appliances become an important part of our lives both at work and home.

For over 35 years, Honda generators have set the industry standard for portable generators with the most extensive model selection for a variety of commercial and consumer applications.

The EX7 uses the same high-speed multi-point alternator as the EU10i. This Honda developed technology reduces overall weight and size by 25% to 50% compared to similarly classed conventional models, making lifting and transporting even easier.

The EX7 uses Cyclo-converter technology which ensures “clean” electricity with minimal Sine wave distortion, even under conditions of frequent load This generator's portability and quality power makes it ideal for a wide range of uses

Features
8 Amp/12 Volt DC, maximum 1000W/240 Volt AC
Delivers greater fuel efficiency via the built-in Eco-Throttle
Lightweight 13kg
Whisper-quiet operation from 52dB (A)
Up to 8 hours of continuous operation on a full fuel tank

2000watts / 240 Volt AC
8amp/12 dc Charger
Delivers greater fuel efficiency via the built-in Eco-Throttle
Up to 15 hours of continuous operation on a full fuel tank
Lightweight 21kg
Whisper-quiet operation from 53dB (A)
BONUS GENUINE HONDA COVER VALUE $ 66.00

Now powered by Honda’s Generation II mini 4-stroke engine
Economical 1” volume pump
Big 35m head
Delivers 110L/min capacity

Transport handle.
The steering mechanism is adjusted by turning the handle.
The vibration axle is mounted on double bearings.
Equipment and components are treated against corrosion.
4-stroke motor.
The handle can be clipped onto the beam for easy transport.
Supplied with mounting wrench and transport handle

NEW NEW NEW NEW NEW NEW NEW
Engine
Power output 4.8 kW / 6.44 hp
Cylinder displacement 94 cm³ / 5.74 cu.inch

DEX, the new Dust Extinguisher System that gives cleaner cutting with less water usage and slurry.
Easy to start thanks to Air Purge and decompression valve.
The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life.
Efficient vibration dampening reduces vibrations to less than 5 m /s², for more convenient operation.
DEX – water-saving wet cutting kit for efficient dust management.
Fuel indicator in the tank shows fuel level, to help avoid unnecessary stoppages.

A floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on medium-sized concrete areas. The grinding and suction is efficient thanks to the high rpm levels, the wide range of grinding discs and the design of the dust guard and vacuumport. PG 280 SF is easy and convenient to use, with ergonomically designed handlebar and low noise levels. Two engine options: 2.2 kW 1-phase. 240v Motor
Redi-lock
Husqvarna’s Redi Lock™ is an instant and hassle-free system for changing diamond tooling. Robust construction ensures maximum protection and life of your diamond tools

Blade shaft wrench and angle cut guide supplied as standard.
Removable water tank makes cleaning and refilling easier.
Quality continuous rim diamond blade supplied with the machines.
All spindle diameter 25.4 mm and 230 mm blade size for all machines.
Impressive cutting length of 730 mm.
Oscillating head for plunge cutting.
Large removable table for easy cleaning.
Supplied with high quality 230 mm GS 2 continuous rim blade, angle cutting guide, side extension for cutting larger tiles, blade shaft wrench, and new self-cleaning electric submerged water pump

From USA Jacksonville, AR – The new AGATEC 110 rotating laser is ideal for installing drop ceilings and drywall and interior layout and renovations. It can also be used for outdoor layout applications such as aligning and squaring tilt-up walls, decks, and foundations.
The AGATEC 110 self-levels electronically in both horizontal and vertical modes, and can be used for leveling, vertical alignment, plumb, and squaring.
The laser package includes a wall mount which can remain attached to the laser when stored in the carrying case, speeding daily set-up. The wall mount’s unique design places the laser at the proper height, so that the beam hits the center of the magnetic target when the target is at the correct installation height for the grid.
Accuracy is ± 1/8” at 100 ft. (± 3 mm at 30 m); working range is 650 ft. (200 m) diameter.
Other features include:
-- Three operating modes: rotating, dot, and scanning (variable scan angle from 2° to 36°)
-- Choice of 150 or 600 rpm
-- Split beam for 90° angles and plumb
-- Split beam (square shot) is left/right adjustable
-- Slope match: up to ± 10% in X axis (use manual mode to override self-leveling)
-- Long battery life: 160 hrs. with 2 D alkaline batteries
-- H.I. (height of instrument) warning to prevent errors
-- Electronic field calibration
Interior package: wall mount, remote control, magnetic target, laser-enhancing glasses
GC (outdoor) package: wall mount and combination detector/remote control with rod clamp

NEW: The Leica Lino L2P5 combines all the advantages of the Lino dot and line lasers. It has four points and two lines which are exactly at right angles to one another. With the Leica Lino L2P5 you are well equipped for any alignment or levelling task!

Range up to 15 m depending on lighting conditions
Range with detector > 30 m
Levelling accuracy @ 5 m ± 1.5 mm
Self-levelling range 4° ± 0.5°
Accuracy o plumb point @ 5 m ± 1.5 mm
Accuracy of horizontal line @ 5 m ± 1.5 mm
Vertical accuracy @ 3 m line length ± 0.75 mm
Number of laser points 4
Number of laser lines 2
Beam direction vertical, horizontal, up, down, right, left
Laser type 635 nm, laser class II
Batteries type AA 4 × 1.5 V
Protection class splash water/ dust proof IP54
Operating temperature -10 °C to 40 °C
Storage temperature -25 °C to 70 °C
Dimensions (H × D × W) 117.8 × 130.7 × 75.4 mm
Weight without batteries 370 g
Tripod thread ¼”

NEW: The Leica Lino P5 projects five laser beams, which are exactly at right angles to one another. This greatly simplifies setting out tasks and makes your interior fitting-out more precise and efficient

Simple, one-button operation, fully automatic, general construction laser
with tripod & staff

The Leica Rugby 55 provides the today's contractor with the tools needed for virtually any leveling or alignment job. The Leica Rugby 55 features an easy to use keypad, a watertight seal, variable head speeds, selectable scanning modes, a bright red beam,Alkaline Batt Pack

Quick and easy gravity auto levelling for horizontal and vertical.
Comes with a receiver / remote control and staff bracket.
100 m radius with receiver.
Wall bracket available for inside use.
The laser for almost all levelling jobs!

Product Information
Handy type line laser Ez-liner
Simple, but multiple works ! Compact & Rugged body with rubber cover. EZ-Liner are Simple, but they have multi-functions and you will find their high performances on your job sites !
Compact & Rugged body with rubber cover
Easy Mode Selection
Wide range of laser line
Tilt mode available on each mode
Available to use Detector
Cross line on ceiling by 2 vertical lines
Safety Lock for Pendulum

"""NEW-NEW-NEW-NEW"""
Leica DISTO D2, the small partner for indoor applications.
Measuring distances and calculating results with the smallest laser distance meter of the world. The compact and handy base model was specifically designed for indoor applications. Shortcut keys for addition, subtraction, area and volume calculation make measuring fast and very reliable. The last 10 measurements are also stored. As with all Leica laser distance meters, the laser dot is clearly visible. You can always see your targeting point, even if the target object is in a hard to access area. Leica DISTO D2 you will never use a measuring tape again!

Measuring range: 0.05 m up to 60 m;
Typ. accuracy: ± 1.5 mm, Precise, fast and reliable indoor measurements
Shortcut keys: Easy-to-use and rapid access to frequently used functions
Illuminated 3-line display: Measured values can be read even in the dark
Flip-out end-piece: Measure from edges or corners
Stake out function: Stake-out equal distances
Time delay release: Measure without shake
Simple Pythagorean functions: Indirect height and width measurements for inaccessible positions
IP 54: Splash and dust proof

Features Your advantages
Measuring range of 0.05 up to 200 m
(0.16 ft up toﾠ650 ft)
typ. accuracy ﾱ 1.0 mmﾠ(ﾱ 0.04 in)* Precise, quick and reliable measurements
Digital Pointfinder with 4x zoom and high resolution color display Convenient measuring to distant objects, even in strong sunlight
Power Range Technology" Measure long distances, up to 100 m without and 200 m with a target plate
Tilt sensor Measure vertical angles up to ﾱ 45ﾰ at the touch of a button
Horizontal distance measurement using the tilt sensor It's no problem to determine distances despite obstructions
Trapezium function Simple and quick measurement of roof slopes and facade areas
Pythagorean functions Indirect height and width measurements at inaccessible positions
Detailed display Additional measurement information available at a touch of a button, e.g. angle information

Features Your advantages
Measuring range of 0.05 m / 0.16 ft up to 200 m / 650 ft; typ. accuracy ﾱ 1.0 mm / ﾱ 0.04 in Precise, quick and reliablemeasurements
BLUETOOTHﾮ Error-free and quick data transfer to Pocket PC or PC
Leica DISTOTM Transfer software is included Easy transfer for further processing in Excel, Word, AutoCADﾠor other Windows-based programs
AutoCAD plug-In Convenient drawing using your AutoCAD software
360 tilt sensor Measure any slope, even overhead
Digital Pointfinder with 4x zoom and high resolution colour display Convenient measurement of distant objects, even in bright sunlight
Indirect measurement functions with tilt sensor Determine distances to objects that cannot be measured directly because they lack reflective points
Height profile measurements Determine spot heights and ground profiles

New: Now the Leica DISTO™ D3a is also available with BLUETOOTH®. Due to this technology, measurement results can be wirelessly and accurately transferred to Pocket PCs and PCs. Furthermore, the Leica DISTO™ D3a BT is equipped with “Smart Horizontal Mode™, tilt sensor, calculation possibilities for rectangular and triangular areas, volumes, room dimensions and various types of Pythagoras functions.
Other Specs As Per D3a

New: With a measuring accuracy of ± 1.0 mm, the Leica DISTO™ D3a offers high precision at the touch of a button. The large, illuminated display shows the measurement results and supplementary information clearly and legibly.

Smart Horizontal Mode™
Thanks to the combination of distance and tilt measurements you can determine the horizontal distance precisely and simply. If you take a measurement at an inclination of ± 45°, the Leica DISTO™ D3a always calculates the shortest distance. So you can measure quickly and easily, even over the top of objects and people.

Multiple functions
The Leica DISTO™ D3a can calculate rectangular and triangular areas, volumes, room dimensions and various types of Pythagoras functions. A time delay release and enough memory for up to 20 measurements round off the instrument's wide range of functions – a concept designed to make your work life easier.

Multifunctional endpiece
Aim the instrument straight at the target point, whether measuring out of corners, slots or from edges: with this endpiece you are prepared for all measuring situations. The instrument detects the endpiece automatically, which helps you avoid expensive measuring errors.

Power Range Technology™
The integrated Power Range Technology™ makes measuring long distances very easy. You can measure up to 80 m without a target plate and even up 100 m with a target plate, without having to take single step.

Brilliant and clearly arranged display
The results are displayed on the large (2”), clearly arranged and high contrast display. At the touch of a button, the display makes supplementary information available about the measurements, e.g. indirect height, room dimensions, angle information or room angles.

A simple self-centring jig for cutting mortises for door locks. Drive shaft accepts 1/4" shank router bits or Porter Cable style mortise cutters. Not for use with routers. Maximum depth of cut: 150mm, sliding length is variable by adjusting clamping heads vertically. The height gauge hooks on top of a door or it can be inverted to set the unit at a pre-set height over the floor. Power drill and cutting bit not included.

+ Makita 18V Mobile Hammer Driver Drill #BHP454Z
+ Makita 18v Cordless Mobile Circular Saw #BSS610Z
+ Makita 18v Cordless Mobile Recipro Saw #BJR181Z
+ Makita 18V Flash Light. #BML185
• 18V Mobile Impact Driver (Tool Only) #BTD140Z
• 18V 115mm Mobile Angle Grinder (Tool Only) #BGA452Z
• 18V Mobile Rotary Hammer (Tool Only) #BHR202Z
• 18V Mobile Blower (Tool Only) #BUB182Z
• Jobsite Radio #BMR100
• 18V Mobile Jigsaw (Tool Only) #BJV180Z
• LXT Bag #
• 4 x Li-Ion 3.0Ah Batteries #BL1830
+ Makita LXT Lithium-lon Battery Charger. #DC18RA

Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
Hammer case cover protects work piece from scratches, increasing manoeuverability
Built-in L.E.D light for more illuminated accurate work
Compact design - 146mm long and weighs only 1.4kg
2 x Batt,Charger,Carry Case
Rubberised soft grip
BONUS 3RD BATT AT NO CHARGE

NEW MODEL - NEW MODEL
Makita's New and improved Power Cutter
More power, Lighter , Easier To Start
Five-stage, foam-paper-nylon system with Advanced Directional
Air Flow provides very clean air for better saw performance
Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
Improved ignition system with larger flywheel and rare earth magnets for more power
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground
On-Off-Choke operating switch on a single lever for operator convenience
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
Microchip controlled ignition system designed to compensate engine timing according to work load
Aluminum guard and wheel pressure plates to reduce weight
2-mass dampening system provides reduced vibration to operator

Planing - Width 170mm
Planing - Depth 2mm
No Load Speed 15,000rpm
Continuous Rating Input 1,200W
Overall Length 529mm
Net Weight 8.8kg
Power Supply Cord 2m

LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5x more cycles
than ni-cad tools.
1 x Hammer Drill Driver
1 x Recipro Saw
1 x Circular Saw
1 x Torch
1 x 115mm Grinder
1 x Impact Driver
2 x 3.0Ah Batt
1 x Charger

6.35mm Trimmer
Ergonomic slim body design for superior handling and reduced operator fatigue
Rubber roller for easy and precise depth adjustment and cam action locking
Constant speed control (3707FC only)
Built in Maklite for easy trimming when lighting is inadequate!
Collet Capacity 6.35mm
No Load Speed 26,000rpm
Continuous Rating Input 500W
Overall Height 204mm
Base Dimensions (mm) 82x90
Overall Length 204mm
Net Weight 1.5kg
Power Supply Cord 2m

6.35mm Laminate Trimmer
Smooth and precision depth adjustment with racks and pinion mechanism
Rubberised soft grip provides comfort and control
Transparent plastic base for clear view of trimming edge
0-45 degree tilt base
Collet Capacity 6.35mm
No Load Speed 30,000rpm
Continuous Rating Input 530W
Overall Height 302mm
Overall Length 102mm
Net Weight 1.6kg
Power Supply Cord 2m

Blade diameter 110mm
Max. cutting capacity - at 90 degrees 24mm
Max. cutting capacity - at 45 degrees 21mm
Continuous rating input 860W
No load speed 12,000rpm
Overall length 236mm
Net weight 2.9kg
Power supply cord 5m

Blade diameter 180mm
Max. cutting capacity - at 90 degrees 60mm
Continuous rating input 1,400W
No load speed 5,000rpm
Overall length 270mm
Net weight 6.9kg
Power supply cord 5m

Rubber shield helps keep debris away from operator and from entering the motor
Removable base for a closer edge-to-edge cut
Guide wheels on the tool guard ensure smooth tool travel over surface material
Tool body position can be adjusted (0 - 80 degrees) for operator comfort; operates independently of cutting depth for convenience and efficiency
Rubberized wrap around handle for increased control and comfort with reduced operator fatigue
Lock-on button for continuous operation
Ball bearing construction for longer tool life
Externally accessible brushes for greater serviceability

Burr-free cuts through metal – cool to touch
Cuts 75% quicker than abrasive cutters
Virtually spark free cuts – cuts up to 6mm thick mild steel
Heavy-duty blade cover for efficient swarf collection
Thumb operated lever for blade guard retraction for plunge cutting
Stainless steel base plate for stability and durability
Excellent for roof and fence sheeting with optional blade
Blade diameter 185mm
Max. cutting capacity - at 90 degrees 63mm
Continuous rating input 1,100W
No load speed 3,500rpm
Overall length 358mm
Net weight 4.8kg
Power supply cord 2.5m

Powerful 720W motor
Variable speed control with constant speed electronics
3 mode oscillating feature allows faster cutting
Quick tool-less blade change
Accepts Bayonet blades
Adjustable aluminium base for bevel cutting
Built-in Maklite for easy tracing of cutting line when lighting is inadequate
Ergonomic rubberised design D-handle
Low vibration and low noise
Max. Cutting Capacity - Length of Stroke 26mm
Max. Cutting Capacity - In Wood at 90 Degrees 135mm
Max. Cutting Capacity - In Steel at 90 Degrees 10mm
Continuous Rating Input 720W
Strokes per Minute 800-2,800
Overall Length 236mm
Net Weight 2.4kg
Power Supply Cord 2m

Powerful 720W motor
Professional jigsaw designed to give a superior finish
Variable speed control with constant speed electronics
Extremely low vibration
3 mode oscillating feature allows faster cutting
Built-in dust blower
Tilting base that cuts up to 45°
Quick tool-less blade changes
Built-in Maklite for easy tracing of cutting line when lighting is inadequate
Barrel handle design
Max. Cutting Capacity - Length of Stroke 26mm
Max. Cutting Capacity - In Wood at 90 Degrees 135mm
Max. Cutting Capacity - In Steel at 90 Degrees 10mm
Continuous Rating Input 720W
Strokes per Minute 800-2,800
Overall Length 274mm
Net Weight 2.4kg
Power Supply Cord 2m

Maximum cutting depth of 63.5mm
Powerful 1800W motor
Depth guide calibration for accurate adjustment
Lightweight at only 4.6Kg
Built-in job light using twin LED light
Blower function for a cleaner cutting view
Magnesium base
Bevel adjustment with positive stops at 22.5 and 45 degrees

Ultra fast cutting through all grades of timber even handles hardwoods with ease
Thin kerf blade gives a smooth cutting action
Robust and light with a compact design makes it the ideal saw to take onsite
Tight gear tolerance for minimal arbor float and quieter operation
45° front bevel lock

Thin kerf blade cuts through all grades of timber even hardwoods
Improved handle design gives great balance
Bevel lock to 45°
Calibrated aluminium base for increased accuracy

LXT423 18V 3.0Ah Mobile 4 Piece Combo Kit
BTD140Z 18V Mobile Impact Driver (Tool Only)
BJV180Z 18V Mobile Jigsaw (Tool Only)
BMR100 Jobsite Radio
BL1830 2 x Li-Ion 3.0Ah Batteries

6mm, 9mm, 13mm Belt Sander
The perfect sander for filing out housings or delicate work
Precise belt adjustment that aids tracking and positioning
Head adjustment 110° for easy handling
Variable speed control
Full ball bearing construction
Can be connected to dust extraction system
Low profile belt head, 14mm

180mm Sander Polisher
Electronic speed control maintains constant speed under load, critical for a professional finish
Perfect for clear coat finishes
Variable speed with preset stepped speed dial, ideal for ultra slow polishing
Hook and loop base for wool bonnet
D-handle for easy operation and control
Continuous rating input 1,200W
Spindle Thread Size M14x2
No Load Speed 0-600/3,000rpm
Max. capacities abrasive and wood 180mm
Overall length 470mm
Net weight 3.0kg
Power supply cord 2m

100mm Belt Sander
Excellent for floor sanding, cleaning and smoothing off table and bench tops
Fast belt speed of 500m/min will rip through any jobs quickly and efficiently
Takes standard size belts 100x610mm for convenience
Industrial strength 1,200W motor
Excellent dust extraction
Connects directly to dust extraction system or bag provided
Belt Size 100x610mm
Belt Speed 500m/min
Continuous rating input 1,200W
Overall length 353mm
Net weight 5.9kg
Power supply cord 2m

125mm Angle Grinder
Unique Super Joint System
1,400W motor
Patented Zig Zag varnish to protect critical parts plus labyrinth construction
Long life auto cut out carbon brushes
Electronic speed controller keeps grinder disc rotating at a constant speed even under heavy loads
Soft start function
Dial up variable speed control
Continuous Rating Input 1,400W
Max Capacity - Depressed center wheel 125mm
Max Capacity - Wire cup brush 90mm
Max Capacity - Abrasive disc 125mm
Max Capacity - Diamond wheel 125mm
No load speed 2,800-11,000rpm
Overall length 299mm
Spindle thread DIN M14x2
Net weight 1.8kg
Power supply cord 2m

76mm Belt Sander
Can use a 76mm and 100x610mm belts depending on the application
Perfect for floor sanding, cleaning and smoothing off table and bench tops and can be connected to dust extraction system
Low profile nose and extended roller allows this machine to get into places the others can’t
Fine adjustment tracking
Large lever for quick belt changes
Graphite pad for reduced belt wear and reduced heat in the sanding area
Belt Size 100x610mm
Belt Speed 400m/min
Continuous rating input 850W
Overall length 355mm
Net weight 4.8kg
Power supply cord 2m

LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles




Features:

New compact design with metal gear housing
4 pole LXT motor for improved performance
LED light for job illumination
Large lever switch for variable speed control



Specifications:

Capacities – Steel 10mm
Capacities – Wood 25mm
No load speed 0-1800rpm
Head Height 93mm
Net Weight 1.6 Kg
Voltage
18V

All metal gears and gear change mechanism for maximum gearbox durability
Mechanical 2-speed gearing
Mode selection system-quickly shift from "drill" to "driver" for increased efficiency
Compact and lightweight 4-pole motor for higher operation efficiency in heavy duty applications
Single sleeve keyless chuck allows for easy bit installatiion/removal
Twin LED job light with afterglow function
Belt clip and bit holder convenient for both right and left handed user
Anti-slip rubberised side grip
No Load Speed - 1st0-400rpmSpecifications - Capacity - Wood50mmSpecifications - Capacity - Steel13mmSpecifications - Capacity - Max Output375WSpecifications - Capacity - Chuck Capacity1.5-13mmOverall Length231mm

Extremely compact and lightweight, with ample power for most fixing tasks
Alll metal gears and gear change mechanism for maximum gearbox durability
Mechanical 2-speed gearing
Electric brake
Variable speed
Compact and lightweight 4-pole motor for higher operation efficiency in heavy duty applications
Single sleeve keyless chuck allows for esy bit installation/removal
Single LED job light with afterglow function
Anti-slip rubberised side grip
PRODUCT SPECIFICATIONSSpecifications - Capacity - Wood38mmSpecifications - Capacity - Steel13mmSpecifications - Capacity - Max Output300WSpecifications - Capacity - Chuck Capacity1.5-13mmOverall Length203mmNet Weight1.6kgCharge Time30mins
2 x Li-Ion Compact Batteries (BL1815)Philips Bit 2-45Charger (DC18SD)Plastic Carry Case

All metal gears and gear change mehanism for maximum gearbox durability
Mechanical 2-speed gearing
Mode selection system-quickly shift from "drill" to "driver" for increased efficiency
Compact and lightweight 4-pole motor for higher operation efficiency in heavy duty applications
Single sleeve keyless chuck allows for easy bit installation/removal
Twin LED job light with afterglow function
Belt clip and bit holder convenient for both rght and left handed user
Anti-slip rubberised side grip
SPECIFICATIONSPRODUCT SPECIFICATIONSNo Load Speed - 2nd0-1,700rpmNo Load Speed - 1st0-400rpmSpecifications - Capacity - Wood65mmSpecifications - Capacity - Steel13mmSpecifications - Capacity - Max Output375WSpecifications - Capacity - Chuck Capacity1.5-13mmOverall Length231mmNet Weight2.1kgCharge Time22minsVoltage18V

14.4V LXT Mobile Auto Feed Screwdriver
Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
Increased rotational speed - 4,000rpm ensuring smooth screw driving
Tool-less stopper base adjustment
New silent clutch - features high durability with direct drive transmission in reverse rotation
Reversing switch
Rigid aluminium casing
Capacities – Collated drywall screw 4mm x 25-55mm
No load speed 4,000rpm
Drive shank 6.35mm (1/4") Hex
Overall length 424mm
Net weight 2.1kg
Voltage 14.4V

18V LXT Mobile Auto Feed Screwdriver
Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
Increased rotational speed - 4,000rpm ensuring smooth screw driving
Tool-less stopper base adjustment
New silent clutch - features high durability with direct drive transmission in reverse rotation
Reversing switch
Rigid aluminium casing
Capacities – Collated drywall screw 4mm x 25-55mm
No load speed 4,000rpm
Drive shank 6.35mm (1/4") Hex
Overall length 424mm
Net weight 2.3kg
Voltage 18V

Easy to grip housing - ensures easier handling with a smaller circumference and features soft grip for enhanced hand comfort
Slide-type on/off switch
Uses standard 115mm discs
Replaceable brushes
Warning lamp
Electronic current limiter for overload protection
Battery replacement reminder
Anti-start function for safety

Extremely compact and lightweight, with ample power for most fixing tasks
All metal gears and gear change mechanism for maximum gearbox durability
Mechanical 2-speed gearing
Compact and lightweight 4-pole motor for higher operation efficiency in heavy duty applications
Single sleeve keyless chuck allows for easy bit installation/removal
Single LED job light with afterglow function
Belt clip and bit holder convenient for both right and left handed users
Anti-slip rubberised grip
PRODUCT SPECIFICATIONSPRODUCT SPECIFICATIONSNo Load Speed - 2nd0-1,500rpmNo Load Speed - 1st0-400rpmImpact Rate - 2nd0-22,500ipmImpact Rate - 1st0-6,000ipmSpecifications - Capacity - Masonry13mmSpecifications - Capacity - Wood38mmSpecifications - Capacity - Steel13mmSpecifications - Capacity - Max Output300WSpecifications - Capacity - Chuck Capacity1.5-13mmOverall Length215mmNet Weight1.6kgCharge Time30minsVoltage18VMax Fastening Torque - Hard50NmMax Fastening Torque - Soft32Nm

Best in class cutting speed - 50% faster cutting with a 28mm stroke that cuts at 2,900spm
Two built-in L.E.D lights for more illuminated accurate work
Tool-less blade change and shoe adjustment
Retractable rafter hook
Built-in dust blower to stop dust build up around shaft
Ergonomic lightweight design

18V LXT Mobile Jigsaw
Tool-less blade change for quick and convenient blade changes
Variable speed trigger with a soft start for easier, more accurate cutting in all applications
Electronic brake for added safety
Built-in L.E.D light for more illuminated accurate work
Ergonomic lightweight design
Strokes per minute 0-2,600spm
Cutting Capacity – Wood 135mm
Length of stroke 26mm
Overall length 258mm
Net weight 2.8kg
Voltage 18V

150mm Random Orbital Sander
Efficient sander for all finishes with variable speed control
Through the pad dust extraction
Dual handle design for controlled operation; detachable front handle for sanding in confined areas
3mm orbit diameter provides a swirl free finish
Connects directly to dust extraction system or dust bag
Very low vibration
Pad Size 150mm
Abrasive paper size 150mm
Continuous rating input 310W
Orbits per Minute 4,000-10,000
Overall length 309mm
Orbit diameter 3.0mm
Net weight 2.3kg
Power supply cord 2m

150mm Random Orbital Sander
Dual mode selector for ‘random orbit’ action (finishing) and ‘random orbit with rotation’ action (coarse and polishing)
Complete the job from rough to a high finish with one tool
Variable speed control
Very low vibration
Recommend this sander to be connected to dust extraction system
Pad Size 150mm
Abrasive paper size 150mm
Continuous rating input 750W
Orbits per Minute 1,600-5,800
Overall length 316mm
Orbit diameter 5.5mm
Net weight 2.7kg
Power supply cord 2m

18V Mobile Metal Cutter
Compact and lightweight design
Rubberised soft grip
Base plate of stainless steel
Large lock-off lever, easy to operate
Built-in job light using twin L.E.D light
Large view window
Capacities – Max output 370W
Capacity at 0°: 51mm
No load speed 3,600rpm
Overall length 348mm
Net weight 2.4kg
Voltage 18V

Brushless DC motor which creates more power with less maintenance
Very compact design, only 139mm
3 stage impact selector, with a maximum torque of 155Nm
Independent on/off LED job light
PRODUCT SPECIFICATIONSNo Load Speed0-2,400rpmSpecifications - Capacity - Standard BoltM5 - M14Specifications - Capacity - High Tensile BoltM5 - M12Specifications - Capacity - Machine ScrewsM4 - M8Specifications - Capacity - Coarse Thread22-125mmSpecifications - Capacity - Max Output210WMax Fastening Torque155NmDrive Shank6.35mm (1/4) HexOverall Length139mmNet Weight1.3kgCharge Time22minsVoltage14.4V

Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
Hammer case cover protects work piece from scratches, increasing manoeuverability
Built-in L.E.D light for more illuminated accurate work
Compact design - 146mm long and weighs only 1.5kg

Makita 4-pole motor design with dual steel ball bearings for maximum torque
Hammer case cover protects work piece from scratches, increasing manoeuvrability
Bulit-in LED job light with afterglow function
Ergonomically designed rubberised soft grip
SPECIFICATIONSPRODUCT SPECIFICATIONSSpecifications - Capacity - High Tensile BoltM5 - M12Specifications - Capacity - Standard BoltM5 - M14Specifications - Capacity - Machine ScrewsM4 - M8Specifications - Capacity - Coarse Thread22-125mmSpecifications - Capacity - Max Output220WMax Fastening Torque145NmDrive Shank6.35mm (1/4) HexOverall Length146mmNet Weight1.3kgCharge Time30mins

Brushless DC motor which creates more power with less maintenance
Very compact design, only 139mm
3 stage impact selector, with a maximum torque of 160Nm
Independent on/off LED job light
Impact Rate - 3rd0-1,300ipmImpact Rate - 2nd0-2,800ipmImpact Rate0-3,400ipmSpecifications - Capacity - High Tensile BoltM5 - M12Specifications - Capacity - Standard BoltM5 - M14Specifications - Capacity - Machine ScrewsM4 - M8Specifications - Capacity - Coarse Thread22-125mmSpecifications - Capacity - Max Output240WMax Fastening Torque160NmDrive Shank6.35mm (1/4) HexOverall Length139mmNet Weight1.5kgCharge Time22minsVoltage18VNo Load Speed0-2,600rpm

18V Mobile Angle Impact Driver
Compact angle head for easy access in tight places
Conveniently located reverse switch
Ergonomically designed handle with rubberised grip provides more comfort and control
Built-in L.E.D job light for more illuminated accurate work
Capacities – Machine Screw M4-M8
Capacities – Standard bolt M4-M8
Capacities – High tensile bolt M4-M8
Capacities – Coarse thread 22-75mm
No load speed 0-2,000rpm
Impacts per minute 0-3,000ipm
Max. fastening torque 60Nm
Overall length 387mm
Net weight 1.7kg
Voltage 18V

18V Mobile 4 Mode Impact Driver with Bonus Bits
Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
Hammer case cover protects work piece from scratches, increasing maneuverability
Built-in L.E.D. light for more illuminated accurate work
Compact design - 146mm long and weighs only 1.5kg

Max Cutting Capacity - Hole Width 130mm
Max Cutting Capacity - Hole Depth 155mm
Max Cutting Capacity - Hole Width - Traverse Cut 308mm
No Load Speed 3,200rpm
Continuous Rating Input 1,140W
Plunge Capacity 155mm
Overall Height 512mm
Base Dimensions (mm) 298mmx513mm
Overall Length 512mm
Net Weight 17kg
Power Supply Cord 2m

230mm Angle Grinder
Heavy duty motor with 2,400W continuous rating input
Outstanding durability.Super anti-dust structure.Machined bevel gear. Increased heat resistance
Low vibration rear handle with soft grip for more comfort and control
Rotatable rear handle can be positioned to suit most cutting and grinding operations
Large rubber tool rest protects work piece from scratches
Gear housing can be positioned at every 90°
Soft start
Torque limiter
Continuous Rating Input 2,400W
Max Capacity - Depressed center wheel 230mm
Hole dia. 22,23mm
No load speed 6,600rpm
Dimension (LxWxH) 511x249x140mm
Net weight 5.5kg
Power supply cord 2.5m

New design with improved cosmetic/engineering features
Wheel covers have in-built task lights
A magnifying feature is incorporated in one eye-shield for close work
The motor is of the split capacitor type, resulting in higher efficiency with reduced noise and vibration
Hole dia.12.7mmContinuous Rating Input250WNet weight9.4kgMax. wheel size150x16mmNo load speed2,850rpmOverall length375mm

Uses Lithium-Ion battery technology as ignition source
Ergonomically designed handle with rubberised soft grip
Dual position hook convenient for hanging from rafter or steel pipe
Aggressive spikes allow for firm grip on material when firing
LED indication lamp with two convenient functions: - Battery power warning - Trouble detection
Fastener range50-90mmFastener type34°Magazine capacity44pcs
Net weight 3.4kg
Overall length321mm
Voltage7.2V

Lightweight design, only 4.5kg
Lock on button
Rubberised soft grip
Aluminium housing
Easy servicing
Auto cut-out brushes
Powerful and compact body
Tool-less system for changing bits

Max. bit dia18mmContinuous rating input1,100WDrive ShankSDS MAX TypeImpacts Per Minute1,100 - 2,650Power supply cord5.0mNet weight5.6kgOverall length466mmJoules11.6

Powerful 1,500W motor; efficient 1,450bpm providing world class performance
Accepts 30mm hexagonal bits
Rugged side handle swivels 360° and can be locked into position for added control when using a chisel or clay spade
Convenient lock-on button for continuous operation
Enlarged rubberised grip is ergonomically designed to provide comfort
Damaging masonry dust is kept out of the cylinderntrol, and reduce operator fatigue
Secure locking bit system
Internal O ring fits around the end of the bit to ensure
SYDNEY METRO DELIVERY ONLY
LIMITED STOCK AT THIS PRICE

Lowest vibration in its class
AVT counter weight mechanism helps to reduce vibration
Auto cut-off brushes
Warning light indicates trouble with cord
28.6mm Hex shank

Dual mode operation - hammer with rotation or rotation only
SDS-plus chuck
Torque limiter protects tool and operator if the bit should jam
Idle stop function stops internal wear until the bit is in contact with material
Rotating brush holder system ensures optimum power in both forward and reverse, and offers longer brush and switch life
Lock-on switch button
Rubberised and dimpled non-slip soft grip for comfort and control

Max in Steel: 13mm
Max in Wood: 32mm
Max in Concrete: TCT 28mm / Core 80mm
Joules: 2.9Js
Blows per minute: 0-4500bpm
No Load Speed: 0-1100rpm
Net Weight: 3.3Kgs

AVT vibration absorbing handle
Change lever positioned on the top of the machine for reduced possibility of breakage
3 mode - Rotary Drilling/Chiselling/Drilling
Torque limiter
One-touch sliding chuck forr east bit changes
24 Bit angle settings
Electronic with: - Variable speed control
Max. capacity - Concrete32mmJoules6.4jOverall length398mmNet weight4.9kgImpacts Per Minute1,650-3,300ipmDrive ShankSDS PlusNo load speed315-630rpmMax. capacity - Steel13mmMax. capacity - Wood32mmContinuous rating input850WCapacity - Concrete (Diamond Core Bit)90mm

Most powerful and efficient in the class super comfort low vibration model
Recommendable for managing exposure of vibration to the body
9.5 joules of impact power
Low vibration level of 4m/s2
AVT (Anti Vibration Technology) built in

1.6mm Nibbler
Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
Die rotates 360°
Ergonomic, slim body design for easy gripping
Extremely light – weighs only 1.6kg for easy handling
Lock on sliding switch for continuous use
Built-in thickness gauge for convenience
Max. cutting capacity - Mild steel 1.6mm
Max. cutting capacity - Stainless 1.2mm
Max. cutting capacity - Aluminium 2.5mm
Stroke per minute 2,200
Outside edge 50mm
Inside edge 45mm
Continuous rating input 550W
Overall length 261mm
Net weight 1.6kg
Power supply cord 2m

3.2mm Nibbler
D-handle for full cutting control
Built-in thickness gauge for convenience
Easy punch and die replacement for less down time
Powerful 820W motor allows cuts through 3.2mm mild steel
Zips through sheet metal, aluminium and other plate materials
Cutting line and blade action easily visible
Max. cutting capacity - Mild steel 3.2mm
Max. cutting capacity - Stainless 2.5mm
Stroke per minute 1,300
Outside edge 128mm
Inside edge 120mm
Continuous rating input 820W
Overall length 215mm
Net weight 3.4kg
Power supply cord 2m

1,010W motor drives a more efficient cutting action with less wear and drain on the machine
Strokes-per-minute have been increased by almost 20%
Minimal vibration
A bigger variable speed trigger with lock-on button
Rubber cladding
Push in tool-less blade change system with quick release
Max. cutting capacity - In pipe 90mm
Max. cutting capacity - In wood 90mm
Length of stroke 28mm
Stroke per minute 0-2,800
Continuous rating input 1,010W
Overall length 452mm
Net weight 3.2kg
Power supply cord 2m

Feel its comfort with this machine featuring AVT counter weight mechanism which helps reduce vibration
Preset dial for speed control for optimal stroke speed for application
Clutch - to protect both operator and machine when blade jams
Electronic speed control allows machine to maintain full speed when under excessive load
Tool-less blade change enables operator to insert blade for installation. One touch removal
4 stage orbitial setting for smooth to high speed cutting
Max. cutting capacity - In pipe 130mm
Max. cutting capacity - In wood 255mm
Length of stroke 32mm
Stroke per minute 0-2,800
Continuous rating input 1,510W
Overall length 485mm
Net weight 4.4kg
Power supply cord 2m

82mm Planer
Powerful 850W motor with electronic speed control
Cutting depth of 4mm and 25mm rebate capability makes this a versatile performer.
Depth adjustment dial with easy to read scales, accurate 'click' stops and ergonomic design for easy operation
Chip ejection adjustable either side
Shiplapping/Rebate 25mm
Planing - Width 82mm
Planing - Depth 4mm
No Load Speed 16,000rpm
Continuous Rating Input 850W
Net Weight 3.2kg
Power Supply Cord 2m

305mm Metal Cutting Saw
Specially designed TCT blade provides accurate cold cuts in mild steel pipe, angle iron, tubing, conduit and channels
D-shape handle and lock off button prevents accidental starting
Tool-less guide plate adjusts 0–45° for quick and easy mitre cutting
Shaft lock for easy blade changes with just one wrench
Shavings collection tray
Cast aluminium base for stabilityExternally accessible brushes
Blade diameter 305mm
Max. cutting capacity - at 90 degrees 115-75x150mm
Max. cutting capacity - at 45 degrees 90-85x85mm
Continuous rating input 1,750W
No load speed 1,300rpm
Overall length 516x603x306mm
Net weight 19kg
Power supply cord 2m

Four steel slide arms on linear bearings move in two stages, to give this 190mm saw a massive 300mm width of cut
1,010W motor
Light construction for fit-outs, flooring, multi level sites and roofing
Mitre and bevel angles have positive stops at all the common points and you can lock in any other angle
Bevel cuts up to 45° left or 5° right — perfect when you are undercutting boards for a super snug fit
Please Note This Is A Web Only Special

Features
Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity
Miters 0º-52º left and 0º-60º right, with positive stops at 0º, 15º, 22.5º, 31.6º, and 45º (left and right)
Less weight (52.2 lbs.) and the most compact design in its class for easy job site portability
delivers 3,200 RPMs with soft start for smoother start-ups
Electronic Speed Control maintains constant speed under load for smoother, higher quality cutting
Exclusive 4-3/4" tall dual sliding fence system features upper and lower fence adjustments for more precise miter and bevel cuts
Dual rear-handle bevel lock is easily accessible and adjusts 0º-45º (left and right), with positive stops at 22.5º, 33.9º and 45º (left and right)
Ergonomic rubberized horizontal D-handle design for better fit and added comfort
Easy one-touch miter lock for accurate adjustments and increased efficiency
Replaceable stainless steel miter scale features large and easy-to-read markings
Large precision-machined aluminum base supports material for more efficient cutting
Easy to read dual bevel scale for more precise adjustments
See-through blade guard system for greater visibility of blade and line of cut
Easy one-step blade changes for increased efficiency
Rubberized feet help tool stationary
Large adjustable fence levers for fast and easy adjustments
Oversized trigger switch for better fit, added comfort and easier operation
Fully enclosed bottom throat plate for a cleaner work surface
4-1/2" base height enables user to use three (3) 2x material for temporary table extensions



Makita LS1016 Specifications
Blade Diameter 10"
Arbor 5/8"
Crown Moulding (nested) 6-5/8"
Baseboard (vertical) 4-3/4"
Max. Cutting Capacity Miter Capacity
90° 4-3/4" x 12"
45°L/R 2-1/2" x 8-1/2"
No Load RPM 3,200
AMPS 15.0
Size(L x W x H) 28-1/8" x 25-1/4" x 26-1/2"
Net Weight (lbs.) 52.2
Shipping Weight (lbs.) 64.0

Blade Diameter 255mm
Max. Cutting Capacity - at 90 degrees 90.5x95mm
Max. Cutting Capacity - at 45 Degrees 90.5x67mm
Continuous Rating Input 1,650W
No Load Speed 4,600rpm
Overall Length 530x476x532mm
Net Weight 11kg
Power Supply Cord 2m

Largest crown molding cutting capacity in its class
Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts
Exclusive 6 linear ball bearings deliver smooth, solid, and adjustment-free "dead-on" accurate cuts
Increased capacity for up to 6-5/8" crown molding (vertically nested), 4-3/4" baseboard (vertical), and 12" cross cuts at 90º
Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity
Miters 0º-52º left and 0º-60º right, with positive stops at 0º, 15º, 22.5º, 31.6º, and 45º (left and right)
Less weight (52.2 lbs.) and the most compact design in its class for easy jobsite portability
Powerful 15 AMP direct drive motor requires less maintenance, and delivers 3,200 RPMs with soft start for smoother start-ups
Electronic Speed Control maintains constant speed under load for smoother, higher quality cutting
Exclusive 4-3/4" tall dual sliding fence system features upper and lower fence adjustments for more precise miter and bevel cuts
Dual rear-handle bevel lock is easily accessible and adjusts 0º-45º (left and right), with positive stops at 22.5º, 33.9º and 45º (left and right)
Ergonomic rubberized horizontal D-handle design for better fit and added comfort
Easy one-touch miter lock for accurate adjustments and increased efficiency
Replaceable stainless steel miter scale features large and easy-to-read markings
Large precision-machined aluminum base supports material for more efficient cutting
Easy to read dual bevel scale for more precise adjustments
See-through blade guard system for greater visibility of blade and line of cut
Easy one-step blade changes for increased efficiency
Rubberized feet help tool stationary
Large adjustable fence levers for fast and easy adjustments
Oversized trigger switch for better fit, added comfort and easier operation
Fully enclosed bottom throat plate for a cleaner work surface
4-1/2" base height enables user to use three (3) 2x material for temporary table extensions

18v 4pce Cordless Combo Kit
2sp Hammer Drill,Recipro Saw,Circular Saw,Torch,2x3.0AhBatt,1xCharger,1xCarry Bag

6.35mm Trimmer
Ideal for trimming laminates, edging, freehand and template design work
Clear base plate allows you to perform precise cutting for a perfect finish
Robust and durable aluminium housing
Collet Capacity 6.35mm
No Load Speed 30,000rpm
Continuous Rating Input 440W
Overall Height 220mm
Base Dimensions (mm) 82x90
Net Weight 1.7kg
Power Supply Cord 2m

Ideal for smoothing finishes on concrete as well as leveling concrete seams
Powerful motor for the most demanding jobs
Electronic Speed Control engineered to maintain constant speed under load
Electronic Current Limiter helps protect the motor from overloading

INCLUDES:
Loop Handle
5" Offset Diamond Wheel
Metal Carrying Case
Lock Nut Wrenc
Hex Wrench
Dust Bag Assembly
Dust Shroud Brush Set

Quick release plunge depth adjustment with micro control along with three preset depth stops for added precision
Electronic speed control maintains constant speed under load
Soft start feature for smooth start-ups
Built-in twin L.E.D. lights illuminate the work area for increased visibility
Oversized ball bearing construction for longer tool life
Ergonomic rubberized handles with built-in large two finger switch for added control and use
Conveniently located plunge lock lever for efficient operation
Shaft lock for quick and easy bit changes
Tool-less template guide system for quick and easy installation and removal
Lock-on trigger switch for continuous operation
Built in fan with labyrinth construction minimizes dust from entering the tool for longer tool life
Easy-to-read depth scales
Chip deflector engineered to direct chips away from the operator
Durable flat top design for stability when changing bits
Uses 1/4" and 1/2" shank routers bits
Double insulated

Blade diameter 125mm
Max. cutting capacity - Depth 0-30mm
Max. cutting capacity - Width 6-30mm
Continuous rating input 1,400W
No load speed 9,000rpm
Overall length 346mm
Net weight 4.1kg
INCLUDES 2 x PREMIUM DIAMOND BLADES

1300watt Plunge Cut Saw 56mm Cut in Systainer Box Variable Speed

Heavy-duty 1,800W motor
Tool-less blade change
Automatic oiler for steady bar oiling
Oil level window
Large fan for efficient motor cooling
Safety-Matic chain brake
Double insulated with safety switch
Power1,800WVolt240VBar length400mmOil pumpAutomaticOverload protectionMechanical ClutchWeight4.2kgMax. chain speed13.3mps

Drill diameter in:
- Concrete: 20 mm
- Steel: 16 mm/8 mm
- Softwood: 40 mm/25 mm
No-load speed: 0 - 900 / 0 - 2.600 /min

Grinding wheel Ø: 125 mm
Rated input power: 1.100 W
No-load speed: 10.000 /min
Metabo S-automatic torque limiting clutch
Metabo "Quick" tool quick change
Quick halting of the grinding disc within 3 seconds after shutdown

Grinding wheel Ø: 125 mm
Rated input power: 1.100 W
No-load speed: 10.000 /min
Protect Safety Switch: Safe to operate due to an ergonomically integrated large paddle switch
Dead-man function: Immediate shutdown of the machine when the switch is released
Metabo S-automatic torque limiting clutch
Metabo "Quick" tool quick change

Grinding wheel Ø: 125 mm
Rated input power: 1.400 W
No-load speed: 7.000 - 10.500 /min
Electronic soft start
Thumbwheel for preselection of speed
Vario Tacho Constamatic (VTC) full-wave electronics
Metabo "Quick" tool quick change

Grinding wheel Ø: 230 mm
Torque: 17 Nm
No-load speed: 6.600 /min
Starting current limitation
Metabo "Quick": tool quick change

Base plate, dimensions from corner to corner: 93 mm
Orbital frequency at no load: 14.000 - 22.000 /min
Oscillating circuit: 1,8 mm

Variospeed (V) electronics
Oscillating circuit 2,8/6,2 mm
Diameter of backing pad: 150 mm
No-load speed: 13100 /min
Oscillating circuit: 2,8/6,2 mm

Drill diameter in:
- Concrete: 12 mm
- Steel: 10 mm
- Softwood: 20 mm
No-load speed: 0 - 2.800 /min

Torque: 35 Nm
Drill diameter in:
- Steel: 16 mm
- Softwood: 40 mm
No-load speed: 0 - 550 /min

An Amazing Tool For Fast Paint Removal Without Dust
Up to 70 % time saving compared to conventional working methods
4 reversible carbide blades with high tool life
Cutting edge 80 mm
Maximum notch depth unlimited
Lateral milling height 28 mm
Axial routing depth 0 - 0,3 mm
Radial routing depth 0,15 mm
Rated input power 710 W
Output power 400 W
Speed at rated load 7.200 /min
Weight (without mains cable) 2,6 kg

Drill diameter in:
- Concrete: 20 mm
- Steel: 13 mm/8 mm
- Softwood: 40 mm/25 mm
No-load speed: 0 - 1.000 / 0 - 3.000 /min

Grinding wheel Ø: 100 mm
Rated input power: 800 W
No-load speed: 10.000 /min

Planing width: 82 mm
Adjustable planing depth: 0 - 3 mm
Maximum notch depth 23 mm
Weight (without mains cable) 3,3 kg

Drill diameter in:
- Concrete: 20 mm
- Steel: 13 mm/8 mm
- Softwood: 40 mm/25 mm
No-load speed: 0 - 1.000 / 0 - 3.000 /min

Two cutting speeds for various applications and materials
Parallel guide/ripping fence with long profile, clamped at the back and front. Can be used on both sides, with built-in magnifier.
Saw belt length 2240 mm
Saw belt width 6 - 20 mm
Support surface 548 x 400 mm
Cutting height: 165 mm
Passage width: 305 mm
Cutting speed: 370/800 m/min

Max. vacuum: 1.300 Pa
Max. volume flow: 842 m³/h
Chip bag capacity: 60 l
For connecting to all wood processing machines
Healthy air at the workplace: clean air – clean work
High extraction output
Mobile use, easy to connect
Suction hose connection Ø 100 mm

Electronic motor brake stops motor within seconds
Standard accessories; dust extraction kit and 60 teeth TCT saw blade for professional results
Ideal for interior work
Time saver - cutting widest panels and laminates in a single pass
Suitable for all cut variations
Large worktable made of torsion-free die-cast aluminium
Tilting saw head with precision guiding for exact cuts
With the precise mitre scale the sawhead is steplessly set for mitre cuts
Quick, accurate setting of the most common angles by positive stops

Drill diameter in:
- Concrete with hammer bits: 28 mm
Rated input power: 1.010 W
Max. single impact energy: 3 J
Diverse range of uses: for hammer drilling, chiselling, drilling without impact and screw-driving
Suitable for bits and accessories with SDS-plus shank end or cylindrical shank end (without impact)
Hammer stop
Rotation stop
Metabo "Quick" chuck change
Clockwise and anticlockwise rotation
Speed at rated load 950/2.600 /min
Max. impact rate 4.400 /min
Max. single impact energy 3 J

C12 D – Compact Screwdriver
C12 IC – Digital Inspection Camera
Batteries 2 x C12 B 1.5 Ah Li-Ion
Charger C 12 C 30 min

FEATURES
Advanced technology tuner for high reception accuracy and signal clarity
Weather proof MP3 player compartment
Powers from either M12 battery or 230v mains supply
8 hour run time on standard M12 battery
Weather proof aluminium speakers for rich, full sound
Digital display tuner for accurate signal selection

SPECIFICATIONS
Mute button for instant volume kill
Weight 1.6 kg
Speaker Power 10 Watt
Equaliser
Digital Tuner
MP3 Player compatibility - 1.5mm headphone jack socket
Model: C12 JSR-0

VARIABLE SPEED - Drilling speed increases or decreases with amount of pressure used - Precise drilling start and perfect adjustment to the application

QUIK-LOK - Detachable power cable - Fast & easy changing of damaged cables. Various tools can be used with only one cable

LOCK-ON FUNCTION - Tool can run without the speed switch being continuously pressed - Less tiring use in continuous applications

SAFETY-CLUTCH - Automatically stops or reduces motor power - Protects user and tool in case of jammed drill bit

REVERSE FUNCTION - Changes drilling direction - For screwdriving applications or getting out jammed drill bits

HAMMER-STOP FUNCTION - Turns off the hammering action - For screwdriving applications or drilling without percussion in wood/metal

SERVICE HATCH - Access hatch for servicing (e.g. worn-out carbon brushes) - Few screws for quick & easy serviceability

DEPTH-GAUGE KNOB - Single knob for releasing depth-gauge - Quick scrolling

SOFTGRIP - Rubber-padded rear handle - Comfortable handling & good grip

M12™ cordless system is designed to deliver the power and torque
required for professional applications, in a size that reaches the tightest and toughest places

+ Milwaukee 12v Cordless Lithium Ion Drill Driver #C12DD
+ Milwaukee 12V Lithium Ion Cordless Impact Driver #C12ID
+ Work Light
+ 2 x 12V(1.5Ah)Li-Ion Batteries, Charger & Carry Bag

Milwaukees Legendary Quality Continues in This Heavy Duty Tradesmans Combo Kit. 5 Year Warranty on all Tools 2 Year warranty on Batteries.

Kit Includes:

1 x Hammer Drill Driver
1 x 1/4" Hex Impact Driver
1 x Reciprocating Saw
1 x 6 1/2" Circular Saw
1 x Jig Saw
1 x 4 1/2" Angle Grinder
1 x Torch
2 x Batteries 3.0Ah Li-Ion
1 x Charger
1 x Contractor Bag

"PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

Tough 125 mm angle grinder with powerful 1200-watt motor

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Patented quick release guard for easy adjustment

Patented Fixtec nut for fast and easy disc change



SPECIFICATIONS


Power input 1.200 W

Disc diameter 125 mm

No-load speed 11.000 rpm

Spindle diameter and thread M 14

Max. cutting depth 33 mm

Weight 2,4 kg

PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

The ultimate in mid-size grinding

Patented snap-lock guard

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Patented Fixtec nut for fast and easy disc change

Automatic cut-off carbon brushes

Spindle lock



SPECIFICATIONS


Power input 1250 W

Disc diameter 125 mm

No-load speed 11.000 rpm

Spindle diameter and thread M 14

Max. cutting depth 33 mm

Weight 2.5 kg

Power output 750 W

Efficiency 60 %

Voltage 220 - 240 V V AC

"PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

Tough 125 mm angle grinder with powerful 1500-watt motor

Electronic pack that offers constant speed power, soft-start, motor overload protection and under voltage relay safety

Patented quick release guard for easy adjustment

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Patented Fixtec nut for fast and easy disc change



SPECIFICATIONS


Power input 1.500 W

Disc diameter 125 mm

No-load speed 11.000 rpm

Spindle diameter and thread M 14

Max. cutting depth 33 mm

Weight 2,4 kg

"PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

Powerful 1.520 W motor

The ultimate in mid-size grinding

New digital electronic pack offers constant speed, soft start, motor overload protection and no-load speed limitation

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Patented snap-lock guard

Patented Fixtec nut for fast and easy disc change

Spindle lock

Automatic cut-off carbon brushes



SPECIFICATIONS


Power input 1.520 W

Disc diameter 125 mm

No-load speed 11.000 rpm

Spindle diameter and thread M 14

Max. cutting depth 33 mm

Weight 2.5 kg

Power output 910 W

Voltage 220 - 240 V V AC

Power input 1.520 W
Disc diameter 180 mm
No-load speed 7.600 rpm
Spindle diameter and thread M 14
Max. cutting depth 58 mm
Autobalancer system
Weight 2.9 kg
Power output 910 W
Voltage 220 - 240 V V AC

"PROTECTOR motor" - epoxy resin coated field and heavy-duty winding protection for increased lifetime of tool

Light weight, slim and compact: a versatile all-purpose angle grinder

Flat metal gear head for excellent visibility of workpiece and optimised cutting depth

Die-cast magnesium alloy gear casing for low-vibration running and a long working life

Dust-protected bearings and switch

Patented quick release guard for easy adjustment

Spindle lock save valuable time when changing grinding discs, with only one key



SPECIFICATIONS


Power input 750 W

Disc diameter 100 mm

No-load speed 10.000 rpm

Spindle diameter and thread M 14

Weight 1,8 kg

Cutting depth 28,4 mm

Low speed range ensures excellent results in polishing, stripping, deburring and rust removal

1200 watt motor

New digital electronic offers variable speed, soft start, motor overload protection and no-load limitation

Spindle lock save valuable time when changing grinding discs, with only one key

New ergonomic handle

QUIK-LOK - patented system for fast change of cable

6 m long Quik-lok cable delivered with the polisher

Large-surface safety switch with lock function prevents the machine from being started unintentionally

Automatic cut-off carbon brushes



SPECIFICATIONS


Power input 1200 W

Disc diameter 150 mm

No-load speed 900 - 2.500 rpm

Spindle diameter and thread M 14

Weight 2.2 kg

Power output 600 W

Voltage 220 - 240 V V AC

16 mm 2-speed rotary drill for heavy duty applications

Metal gearbox for long service life

Electronic switch for variable speed to ensure a smooth, easy drilling start

Two-speed planetary synchromesh gear for max. torque

Reversible action for thread cutting and screwdriving

Three-jaw chuck locked to prevent loosening in reverse action



SPECIFICATIONS


Power input 900 W

Drill dia. in steel / aluminium / wood 16 / 20 / 40 mm

Drilling speed (full-load) 100 - 450 / 300 - 1000 rpm

No-load speed 1st / 2nd gear 0 - 750 / 0 - 1600 rpm

Tool reception 3-16 mm

Static stalling torque 88 / 58 Nm 1./2. gear

Weight 4.2 kg

12v Litium-Ion Drill,Impact Driver,Torch
2 x 1.5Ah Batteries,1 x Charger,1 x Carry Bag

NEW Lithium 12v Compact Kit
1 x Impact Driver
1 x Mini Recipro Saw
1 x 12-28mm Copper Pipe Cutter
1 x High Power Torch
2 x Batteries
1 x Charger
1 x Carry Case

COMING SOON
500 RPM - Faster Cutting With Less Fatigue
Auto-Adjusting Jaws - Easily Insert 3/8" to 1" Copper Tubing
Auto-Locking Mechanism - Faster, Easier Operation on Fixed Pipe
Ultra-Efficient Drive Mechanism - Delivers up to 200 cuts per charge
All Metal Sealed Front End - Rust and Corrosion Resistant Cut Head
Built in L.E.D. - Illuminates Work Space
Comes With: 2471 Copper Tubing Cutter, (2) 12V Li-ion Batteries, 30 minute Charger, Carrying Case

Quik-Lok Blade Clamp - Accepts Sawzall and Hackzall Blades
279mm Length
13mm Stroke Length
0-3000 SPM
Sealed All-Metal Mechanism
Built in L.E.D. - Illuminates work space
Comes with: 2420 Hackzall, (2) 12V Li-Ion Batteries, Charger, (2) Hackzall Blades, Carrying Case

C12 Impact Driver
Specially Designed Impact Mechanism - Best in class fastening speed
2000 RPM Speed, 3000 Impacts/Minute
96Nm Torque
6-1/2" length
2.3 lbs Weight w/battery
Battery Fuel Gauge - For displaying remaining run-time
Quick Bit-Loading 1/4" Hex Chuck - For bit insertion and release with one handle
Over-mold Side and Grip - For secure grip and sork surface protection
Variable Speed Trigger - For output control
Built in L.E.D. - Illuminates work space
Comes with: (2) 12V Li-Ion Batteries, Charger, Carrying Case

FEATURES
C18 DD - Driver drill
C18 ID – Impact Driver
Batteries 2 x C12 B 1.5 Ah Li-Ion

FEATURES
C18DD Lithium-Ion Technology
Keyless chuck 1,5-13 mm with one sleeve
Heavy -Duty 2-Speed Metal Gear Box
Compact Length
Battery Fuel Gauge
Forward/Lock/Reverse switch well-positioned for easy operation
LED light for perfect illumination of the working area

SPECIFICATIONS
Battery pack voltage / capacity 18 / 1.5 V/ Ah
No-load speed 0-350 / 0-1400 rpm
Static stalling torque 26 Nm
Torque: soft joint / hard joint 20 / 38 Nm
Wood screws 8 mm
Drilling capacity in steel / wood 13 / 32 mm
Weight with battery 1.8 kg

Electronic speed control

Softstart electronic

Cut-out carbon brushes

Ergonomically designed motor housing for best user comfort

Compact die-grinder for one-handed grinding

Low weight and favourable weight balance for easy handling

QUIK-LOK - patented system for fast change of cable

Suitable for stationary use, using the 43 mm spindle neck



SPECIFICATIONS


Power input 500 W

Collet 6 mm

No-load speed 10.000 - 30.000 rpm

Max. grinding wheel diameter (at 80 m/sec) 40 mm

Max. grinding wheel diameter (at 45 m/s) 20 mm

Weight 1,3 kg

Electronic speed control

Softstart electronic

Cut-out carbon brushes

Ergonomically designed motor housing for best user comfort

Extended spindle enables easy access to awkward spots

Extra high speed of 30.000 rpm



SPECIFICATIONS


Power input 600 W

Collet 6 mm

No-load speed 10.000 - 30.000 rpm

Max. grinding wheel diameter (at 80 m/sec) 40 mm

Max. grinding wheel diameter (at 45 m/s) 20 mm

Weight 1,9 kg

Power input 2800 W
No-load speed 1st / 2nd gear450/900rpm
Coring capacity 1st gear 152 - 254 mm
Coring capacity 2nd gear 51 - 152 mm
Arbor reception 1 1/4"x7 UNC
Weight 9,0 kg

Electronics for variable speed preselection

FIXTEC System for fast base plate adjustment and angle-setting without any tools. Base plate can be shifted in the longitudinal plane for sawing close to edges

FIXTEC - Changing saw blades in seconds

Professional, diecast aluminium base plate

Exact blade guidance through extra large roller guidance for exzellent working results

Efficient sawdust blower and dust extraction system for clean working and clear view of the cutting area

Four-stage adjustment of the pendulum action for increased cutting performance and longer saw blade life



SPECIFICATIONS


Power input 710 W

Cutting depth in wood / aluminium / steel 120 / 30 / 10 / 10 mm

Mitre cutting angle to 45 °

No load stroke rate 500 - 3.000 rpm

Stroke 26 mm

Weight 2.5 kg

Orbital adjustment 4 - step

Well balanced - motor positioned centrally
Precision blade guides
Tool-free blade changes
Externally accessible brushes
SPECIFICATIONS
Power input 800 Watt
No-load speed 0 - 110 m/min
Blade size 1140 x 13 x 0.5 mm
Cutting depth 125 x 135 (w x h) mm Weight 7.7 kg

SPECIFICATIONS
2 x Battery pack voltage / capacity 18 / 3.0 V/Ah
No-load speed 1st / 2nd gear 0-450 / 0-1800 rpm
Keyless chuck 1.5-13 mm
Max. drilling capacity in steel/wood/stone 13/55/16 mm
Percussion rate 28,000 bpm
Max. torque 73 Nm
Weight with battery pack 2.4 kg
5 year Warranty

FEATURES
HD18 PD - Percussion drill
C18 ID – Impact Driver
Batteries 2 x C18 B 3.0 Ah Li-Ion

FEATURES
HD18 PD - Percussion drill
HD18 SX – Reciprocating SAWZALL®
Circular saw
C18 WL – Work Light
Batteries 2 x C18 B 3.0 Ah Li-Ion
Charger C 18 C 60 min
Soft bag

FEATURES
HD18 PD - Percussion drill
C18 ID – Impact Driver
HD18 SX – Reciprocating SAWZALL®
C18 WL – Work Light
Batteries 2 x C18 B 3.0 Ah Li-Ion
Charger C 18 C 60 min
Soft bag

Features
Exclusive AM/FM Tuner with Digital Processor - Delivers Highest reception accuracy and signal clarity
Premium Speakers and 40 Watt Amplifier - Up to 6X more power than competitive radios
Weather Sealed Auxiliary Compartment - Protects MP3 players and other audio devices
Shock Absorbing ABS Polymer and Steel Construction - Protection against weather and abusive job site conditions
Customizable Equalizer and 10-Station Preset - Personalized sound and enhanced musical and vocal quality
AC/DC Versatility - Powered by Milwaukee M12™, M18™, V18™, V28® , NiCd 12V to 28V, and AC outlet
Built-In Bottle Opener - Convenience on and off the job site
12V DC Output - Provides power to charge most small electronic devices
Durable Cord Wrap - Easily store the 6-foot AC cord

KANGO HEX - 21mm tool reception - Superior service life & user-friendliness

IN-LINE DESIGN - Motor built in-level with the gear - Long tool enables upright, ergonomic working position

ANTI-VIBRATION SYSTEM - Significantly reduces vibration - Less strain on joints, more comfortable handling

DIGITRONIC FULL-WAVE ELECTRONICS - Use of complete alternating voltage - Well suited to working with generators

ELECTRONIC SOFTSTART - Short delay of full speed - Precise drilling/chiselling start

NO-LOAD SPEED LIMITATION - In a no-load situation, speed doesn't run at maximum - Protects motor, reduces wear

VARIABLE SPEED - Drilling/chiselling speed increases or decreases with amount of pressure used - Precise drilling/chiselling start and perfect adjustment to the application

SPEED PRESELECTION - Pre-adjustable maximum speed - Perfect speed setting to the application

SERVICE DISPLAY - Control light displays soon before carbon brushes wear out - In-time warning of service need

HEAVY-DUTY METAL GEARCASE - All-metal gearcase - Optimum seating of the gears for enhanced service life

ADDITIONAL SPADE HANDLE - Can be turned and adjusted to various angles up to 360° - Effective, ergonomic handling

ADDITIONAL STRAIGHT HANDLE - Can be mounted in 3 different positions - Effective, ergonomic handling

LOCK-ON FUNCTION - Tool can run without the speed switch being continuously pressed - Less tiring use in continuous applications

SAFETY-CLUTCH - Automatically stops or reduces motor power - Protects user and tool in case of jammed drill bit

ROTO-STOP FUNCTION - Turns off the rotation action - For chiselling applications

SERVICE HATCH - Access hatch for servicing (e.g. worn-out carbon brushes) - Few screws for quick & easy serviceability

SOFTGRIP - Rubber-padded rear handle - Comfortable handling & good grip

SOFTGRIP ADDITIONAL HANDLE - Rubber-padded additional handle - Comfortable handling & good grip



SPECIFICATIONS


Power input 1.700 W

Single blow energy 7 - 27 J

Hammer rate under load 975 - 1.950 bpm

Drilling speed (full-load) 125 - 250 rpm

Drill dia. in concrete / stone 28 - 50 mm

Drilling diameter with core cutter 45 - 150 mm

Drilling diameter with tunnel bit 50 - 80 mm

Weight 11.8 kg

Tool reception K-Hex