Features a 2.3HP Electric Motor 240V / 10AMP
Blade size - 355mm
Trolley complete with foot pedal,
wheels and handles
Travel cart with angle jig for mitre cuts
Bonus Blade Included
Picture is of 210221 Saw $ 1899.00

Diamond Concrete Grinding solution for high stock removal of all material from masonary surface without dust including Premium Diamond Cup Wheel

The FLOOR-PRO REVO 300 combines impressive high
performance with a low weight. The simple design of the
machine ensures easy operation. The handle bar can be quickly
adjusted for operator comfort and control. Noise and vibration
levels are minimal during normal operation. The compact
dimensions and low weight allow it to pass through all doors and
be transported to every floor level, even onto a balcony. The 12A
single phase motor produces an impressive 2.2 kW and can be
used in virtually any household or site.
Grinding width 300mm
Chassis width 305mm
Chassis length 750mm
Chassis Height 950mm
Total Weight 55 kg
Vacuum Hose nozzle diameter 50mm
Height adjustment Hand wheel
Power 2.2 kW / 240V

2.5 kVA portable generator powered by Honda petrol engine. Featuring 11 litre long range fuel tank, giving 8.53 hours of operation at 80% load.
Specifications
Power Rating: 2.5 kVA
Model Rating 0.8pf @ 50Hz: 2.5 kVA
Alternator Rating: 2.5 kVA
Engine Model: Honda GX160
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 11 L
Noise Level @ 7m: 66 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 1.29 L/hr
Operation Hours @ 80% Load: 8.53 hr
Fuel Type: Petrol
Diam.: 550 x 430 x 430 mm (L x W x H)
Weight: 41 kg

A hard working, light weight generator that is ideal for small appliances (e.g. TVs, bar fridges) and small hand tools (e.g. drills and jigsaws).
DELIVERY IN SYDNEY METRO ONLY..

3.4 kVA portable generator powered by Honda petrol engine. Featuring 3.6 litre fuel tank, giving 2.32 hours of operation at 80% load.
Specifications
Power Rating: 3.4 kVA
Model Rating 0.8pf @ 50Hz: 3.4kVA
Alternator Rating: 3.4kVA
Engine Model: Honda GX200
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 3.6L
Noise Level @ 7m: 67 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 1.55 L/hr
Operation Hours @ 80% Load: 2.32 hr
Fuel Type: Petrol
Diam.: 650 x 460 x 425 mm (L x W x H)
Weight: 40 kg

A hard working, light weight generator that is ideal for small appliances (e.g. TVs, bar fridges) and small hand tools (e.g. drills and jigsaws).

DELIVERY SYDNEY METRO ONLY

4.4 kVA portable generator powered by Honda petrol engine. Featuring 6 litre fuel tank, giving 3 hours of operation at 80% load.
Specifications
Power Rating: 4.4 kVA
Model Rating 0.8pf @ 50Hz: 4.4 kVA
Alternator Rating: 4.4 kVA
Engine Model: Honda GX270
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6L
Noise Level @ 7m: 67 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.00 L/hr
Operation Hours @ 80% Load: 3.00 hr
Fuel Type: Petrol
Diam.: 735 x 545 x 540 mm (L x W x H)
Weight: 60 kg

This is the popular choice for farmers and builders when an economical and hardworking power source is needed to produce lots of watts (e.g. small air conditioners and cut-off saws).
DELIVERY SYDNEY METRO ONLY


OPTIONAL ACCESSORIES

5.9 kVA portable generator powered by Honda petrol engine. Featuring 6.5 litre fuel tank, giving 2.6 hours of operation at 80% load.
Specifications
Power Rating: 5.9 kVA
Model Rating 0.8pf @ 50Hz: 5.9 kVA
Alternator Rating: 6 kVA
Engine Model: Honda GX340
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.5 L
Noise Level @ 7m: 68 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.50 L/hr
Operation Hours @ 80% Load: 2.60 hr
Fuel Type: Petrol
Diam.: 735 x 545 x 540 mm (L x W x H)
Weight: 70 kg

This is the popular choice for farmers and builders when an economical and hardworking power source is needed to produce lots of watts (e.g. small air conditioners and cut-off saws).
DELIVERY SYDNEY METRO ONLY

7 kVA portable generator powered by Honda powered engine. Featuring 6.5 litre fuel tank, giving 2.5 hours of operation at 80% load.
Specifications
Power Rating: 7 kVA
Model Rating 0.8pf @ 50Hz: 7 kVA
Alternator Rating: 7 kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.5 L
Noise Level @ 7m: 69 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.60 L/hr
Operation Hours @ 80% Load: 2.50 hr
Fuel Type: Petrol
Diam.: 810 x 550 x 540 mm (L x W x H)
Weight: 75 kg

This is the popular choice for farmers and builders when an economical and hardworking power source is needed to produce lots of watts (e.g. small air conditioners and cut-off saws).
DELIVERY SYDNEY METRO ONLY

This is an efficient universal masonry saw with high cutting capacity for all construction materials. The single-piece frame with integral raceways gives great rigidity and increased protection against impacts.
Blade diameter 350 mm
Max cutting depth 100 mm
Max cutting length 700 mm
240v 3hp Electric Motor
BONUS BLADE

1.3m Length Of Cut 105mm Depth of cut
The cutting head and table can be tilted for 45º bevel cutting.
The cutting head is guided by 8 rollers mounted on sealed roller bearings for (exact movement) accurate travel.
The design has a plunge head and can cut through all material thicknesses in several passes and cut rebates.
Submerged pump for increased reliability.
Removable legs.
The saw table can be dismantled quickly and easily for cleaning.
Reversible side support (right and left) with rollers for wider material available as option

500mm Blade 190mm Cut Capacity
Equipped with Poly V-belts for optimum power transmission.
Husqvarna’s floor saws are robust, well designed and easy to use thanks to features as protective cage, lift bail and cutting depth indicator.
Patent-pending raise/lower assist system, using springs.
Honda 13 hp petrol (FS 413) or Yanmar 9 hp diesel (FS 410 D) engines available.
Patent-pending engine and blade spindle mounting greatly reduces vibrations level for operator.
Precision bearing hinge blade guard system reduces wear and noise.
Left and right cutting capability.
About 30 l above-motor water tank is standard.
Very complete console with engine throttle, emergency stop switch, tachometer, timer and depth indicator.
Integrated tool box

Functional ergonomics make the Husqvarna drill motors easy and convenient to operate.
An electronic current limiter for softer starts. Full speed is reached about two seconds after the switch is turned on.
Water-cooled gearbox (patent pending), where the water passes through the blade spindle, extends life of gearbox and gaskets.
Standard attachment for the stand, and is mainly meant for wet drilling, but can be fitted with an adapter for dry drilling.
Buttons and controls are ergonomically designed and easy to reach.
Water hose and electric cable run parallel conveniently from the machine.
Thanks to electronic rpm control, the job can always be done with optimum power.
Max drill bit diameter, handheld 75 mm
Max drill bit diameter, stand 150 mm
Mounting collar 60 mm
Spindle thread, outer 1 1/4" 7 UNC
Spindle thread, inner G 1/2" or 5/8" 11 UNC
UNC water coupling G 1 / 4"

Motor manufacturer Honda
Max output (As rated by the engine manufacturer) 6 kW / 8 hp 3,5 kW / 4,8 hp
Cutting equipment
Diamond blade, max 350 mm
Max cutting depth 120 mm
Adjustable right rear wheel for increased stability.
Husqvarna’s floor saws are robust, well designed and easy to use thanks to features as protective cage, lift bail and cutting depth indicator.
Patent-pending raise/lower assist system, using gas spring.
Honda 4.8 hp (FS 305) or 8 hp (FS 309) engine.
Only 54 kg with retractable handle (FS 305).
Patent-pending single tube raise / lower system.
Controlled water supplied for longer use with one tank.
17 l water tank.
Adjustable right rear wheel for increased stability.
Cutting on left-hand side
SYDNEY METRO DELIVERY ONLY

When it comes to handheld petrol-driven cutters for demanding jobs, with blades up to 400 mm and cutting depths up to 145 mm, our largest model, the Husqvarna K 1250, is in a class of its own. Despite a large and powerful engine, this brawny, full-size machine is surprisingly easy to operate. The Husqvarna K 1250, with an impressive 5.8 kW output, is the market’s most powerful cutter, and can easily drive 400 mm blades.
Engine
Engine Air-cooled 2 stroke engine
Power output 5,8 kW
Cylinder displacement 119 cm³
Cutting equipment
Blade diameter 350/400 mm
Max cutting depth 125/145 mm

Active Air Filtration™
The Active Air Filtration™ has been upgraded with a redesigned paper filter, for even better dust control.

SmartCarb™
Built-in automatic filter compensation, maintains high power and lowers fuel consumption.

EasyStart
Ensures 50% easier starting by reducing the compression in the cylinder during starting.


Wet cutting kit
Active Air Filtration™
The Active Air Filtration™ has been upgraded with a redesigned paper filter, for even better dust control.


SmartCarb™
Built-in automatic filter compensation, maintains high power and lowers fuel consumption.



EasyStart
Ensures 50% easier starting by reducing the compression in the cylinder during starting.


Wet cutting kit
All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

Including 400mm HS Diamond Blade

NEW Wet-cutting indoors!
With the introduction of Husqvarna K3000 Wet it is now possible to do smaller cutting jobs indoors with a minimum of dust and slurry. By using the newly developed wet cutting kit with specially designed nozzles in combination with double insulated rotor and GFCI, (Ground-Fault Circuit Interrupter), combines the advantages of the electric power cutter and an efficient dust suppression. By using direct water supply and a governing valve the water usage can be kept at a minimum to supply enough water to supress the dust but not cause excessive slurry. The reduction valve and the design of the nozzles ensures a constant and uniform jet of water onto the blade at pressures ranging from 0.5 - 10 Bar (7.3 - 145 PSI). K3000 Wet with the newly developed low usage water system is the first model with Husqvarna DEX system (Dust Extinguisher System).

The Husqvarna K 750 belongs to the new generation of power cutters – developed from the ground up, inside and out. Our unique engine technology, DualCharge™, brings you a highly powerful 3.7 kW engine with low emissions and good fuel economy. It’s simply a cleaner, more efficient engine. The K 750 is also equipped with a large, effective muffler and a vibration dampening system that makes the machine extra quiet and easy to use. As usual, all technical solutions are implemented with a clear focus on what is best for the user. And to ensure efficient cutting, without compromise
Engine
Engine Air-cooled 2 stroke engine
Power output 3,7 kW
Cylinder displacement 74 cm³
Cutting equipment
Blade diameter 300/350 mm
Max cutting depth 100/125 mm

The Husqvarna K 950 Ring is the world’s first petrol-powered cutter to be able to make 260 mm deep cuts with a 350 mm blade. This may seem impossible to anyone who uses standard power cutters, since 350 mm blades can normally only achieve a cutting depth of 125 mm. However, we have quite simply combined our unique – and patented – RingSaw technology, where the blade is driven from the periphery instead of its centre, with the strong, easy to handle petrol-powered cutter, the Husqvarna K 950. With the K 950 Ring, you can have the best of both worlds: the tried and tested ringsaw technology with its incredible cutting depth, and the ease of use and versatility of a petrol-powered cutter.
Engine
Engine Air-cooled 2 stroke engine
Power output 4,5 kW
Cylinder displacement 94 cm³
Cutting equipment
Blade diameter 350 mm
Max cutting depth 260 mm
350mm Blade Included plus Bonus

65mm cutting depth x 950 cutting length. For high precision, portable ceramic, marble and granite cutting.
They represent the very highest quality rail site saws. They are designed for long term use, high accuracy, big capacity and performance while maintaining portability for a single operator to transport.

JPC Plate Compactor
Honda 5.5hp Motor
69kg 510x350mm Plate

JPC80 Plate Compactor
5.5hp Honda Motor
86kg
Plate size 540x420mm

Suitable for applications such as :
Sump emptying
Septic water disposal
Water transfer
Pumping of neutral, non-aggressive factory waste water
Specs.
240v
0.75Kw
300L/Min@5M Head